Utilize for_each_set_clump8 macro, and the bitmap_set_value8 and bitmap_get_value8 functions, where appropriate. In addition, remove the now unnecessary temp_mask and temp_shift members of the intel_soc_dts_sensor_entry structure.
Suggested-by: Andy Shevchenko <andriy.shevche...@linux.intel.com> Tested-by: Andy Shevchenko <andriy.shevche...@linux.intel.com> Signed-off-by: William Breathitt Gray <vilhelm.g...@gmail.com> --- drivers/thermal/intel/intel_soc_dts_iosf.c | 29 +++++++++++++--------- drivers/thermal/intel/intel_soc_dts_iosf.h | 2 -- 2 files changed, 17 insertions(+), 14 deletions(-) diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.c b/drivers/thermal/intel/intel_soc_dts_iosf.c index e0813dfaa278..832e74e5fbde 100644 --- a/drivers/thermal/intel/intel_soc_dts_iosf.c +++ b/drivers/thermal/intel/intel_soc_dts_iosf.c @@ -15,6 +15,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <linux/bitops.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/interrupt.h> @@ -111,6 +112,7 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts, { int status; u32 temp_out; + unsigned long update_ptps; u32 out; u32 store_ptps; u32 store_ptmc; @@ -129,8 +131,9 @@ static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts, if (status) return status; - out = (store_ptps & ~(0xFF << (thres_index * 8))); - out |= (temp_out & 0xFF) << (thres_index * 8); + update_ptps = store_ptps; + bitmap_set_value8(&update_ptps, 32, temp_out & 0xFF, thres_index * 8); + out = update_ptps; status = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, SOC_DTS_OFFSET_PTPS, out); if (status) @@ -232,6 +235,7 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd, u32 out; struct intel_soc_dts_sensor_entry *dts; struct intel_soc_dts_sensors *sensors; + unsigned long temp_raw; dts = tzd->devdata; sensors = dts->sensors; @@ -240,7 +244,8 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd, if (status) return status; - out = (out & dts->temp_mask) >> dts->temp_shift; + temp_raw = out; + out = bitmap_get_value8(&temp_raw, 32, dts->id * 8); out -= SOC_DTS_TJMAX_ENCODING; *temp = sensors->tj_max - out * 1000; @@ -290,10 +295,13 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts, { char name[10]; int trip_count = 0; + int writable_trip_count = 0; int trip_mask = 0; u32 store_ptps; int ret; - int i; + unsigned int i; + unsigned long trip; + unsigned long ptps; /* Store status to restor on exit */ ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, @@ -302,11 +310,10 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts, goto err_ret; dts->id = id; - dts->temp_mask = 0x00FF << (id * 8); - dts->temp_shift = id * 8; if (notification_support) { trip_count = min(SOC_MAX_DTS_TRIPS, trip_cnt); - trip_mask = BIT(trip_count - read_only_trip_cnt) - 1; + writable_trip_count = trip_count - read_only_trip_cnt; + trip_mask = GENMASK(writable_trip_count - 1, 0); } /* Check if the writable trip we provide is not used by BIOS */ @@ -315,11 +322,9 @@ static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts, if (ret) trip_mask = 0; else { - for (i = 0; i < trip_count; ++i) { - if (trip_mask & BIT(i)) - if (store_ptps & (0xff << (i * 8))) - trip_mask &= ~BIT(i); - } + ptps = store_ptps; + for_each_set_clump8(i, trip, &ptps, writable_trip_count * 8) + trip_mask &= ~BIT(i / 8); } dts->trip_mask = trip_mask; dts->trip_count = trip_count; diff --git a/drivers/thermal/intel/intel_soc_dts_iosf.h b/drivers/thermal/intel/intel_soc_dts_iosf.h index 625e37bf93dc..d0362d7acdef 100644 --- a/drivers/thermal/intel/intel_soc_dts_iosf.h +++ b/drivers/thermal/intel/intel_soc_dts_iosf.h @@ -33,8 +33,6 @@ struct intel_soc_dts_sensors; struct intel_soc_dts_sensor_entry { int id; - u32 temp_mask; - u32 temp_shift; u32 store_status; u32 trip_mask; u32 trip_count; -- 2.21.0