[PATCH V2 2/2] watchdog: f71808e_wdt: fix F81866 bit operation

[Ji-Ze Hong (Peter Hong)]

Fix error bit operation in watchdog_start()

Fixes: 14b24a88a3660 ("watchdog: f71808e_wdt: Add F81866 support")
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_ker...@gmail.com>
---
 drivers/watchdog/f71808e_wdt.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c
index bd2ced9f39f4..afd1446241b3 100644
--- a/drivers/watchdog/f71808e_wdt.c
+++ b/drivers/watchdog/f71808e_wdt.c
@@ -339,6 +339,7 @@ static int f71862fg_pin_configure(unsigned short ioaddr)
 static int watchdog_start(void)
 {
        int err;
+       u8 tmp;
 
        /* Make sure we don't die as soon as the watchdog is enabled below */
        err = watchdog_keepalive();
@@ -388,19 +389,18 @@ static int watchdog_start(void)
                break;
 
        case f81866:
-               /* Set pin 70 to WDTRST# */
-               superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL,
-                                 BIT(3) | BIT(0));
-               superio_set_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL,
-                               BIT(2));
                /*
                 * GPIO1 Control Register when 27h BIT3:2 = 01 & BIT0 = 0.
                 * The PIN 70(GPIO15/WDTRST) is controlled by 2Ch:
                 *     BIT5: 0 -> WDTRST#
                 *           1 -> GPIO15
                 */
-               superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_GPIO1,
-                                 BIT(5));
+               tmp = superio_inb(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL);
+               tmp &= ~(BIT(3) | BIT(0));
+               tmp |= BIT(2);
+               superio_outb(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL, tmp);
+
+               superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_GPIO1, 5);
                break;
 
        default:
-- 
2.7.4