The correct DT property for specifying a GPIO used for reset
is "reset-gpios", the driver now accepts this name, use it here.
Signed-off-by: Andrew F. Davis <a...@ti.com>
---
arch/arm/boot/dts/omap2420-n810.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap2420-n810.dts
b/arch/arm/boot/dts/omap2420-n810.dts
index 96b9913ecc1f..09c1dbc0bb69 100644
--- a/arch/arm/boot/dts/omap2420-n810.dts
+++ b/arch/arm/boot/dts/omap2420-n810.dts
@@ -48,7 +48,7 @@
pinctrl-names = "default";
pinctrl-0 = <&aic33_pins>;
- gpio-reset = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */
+ reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */
ai3x-gpio-func = <
10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */
--
2.21.0
