Everyone:
This series contains all of the i.MX Device Tree changes I made to
enable support of PCIe on i.MX8MQ EVK.
Feedback is welcome!
Changes since [v3]:
- Added "num-viewport" to PCIE nodes in "arm64: dts: imx8mq: Add
nodes for PCIe IP blocks"
- Rebased on latest for-next of i.MX tree
- Collected Reviewed-by from Lucas for "arm64: dts: imx8mq-evk:
Enable PCIE0 interface"
Changes since [v2]:
- Fixed various nits pointed out by Lucas
- Collected Acked-by and Reviewed-by from Lucas
- Moved EVK's WiFi reset pin configuration into a separate pinmux
entry.
Changes since [v1]:
- Dropped unsupported IRQ from PCIe nodes (a leftover from vendor tree)
- Added "pcie_aux" clock and moved clock configuration to board
file since "pcie_bus" clock is now board specific
Thanks,
Andrey Smirnov
[v1]
https://lore.kernel.org/lkml/[email protected]/
[v2]
https://lore.kernel.org/lkml/[email protected]
[v3]
https://lore.kernel.org/lkml/[email protected]/
Andrey Smirnov (5):
arm64: dts: imx8mq: Mark iomuxc_gpr as i.MX6Q compatible
arm64: dts: imx8mq: Add a node for SRC IP block
arm64: dts: imx8mq: Combine PCIE power domains
arm64: dts: imx8mq: Add nodes for PCIe IP blocks
arm64: dts: imx8mq-evk: Enable PCIE0 interface
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 42 ++++++++++
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 87 +++++++++++++++++++-
2 files changed, 127 insertions(+), 2 deletions(-)
--
2.20.1
