This patch adds the dts binding document for Zynq SOC QSPI controller.
Reviewed-by: Rob Herring <r...@kernel.org>
Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.re...@xilinx.com>
---
Changes in v2
- None
---
.../devicetree/bindings/spi/spi-zynq-qspi.txt | 25 ++++++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
diff --git a/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
b/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
new file mode 100644
index 0000000..16b734a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt
@@ -0,0 +1,25 @@
+Xilinx Zynq QSPI controller Device Tree Bindings
+-------------------------------------------------------------------
+
+Required properties:
+- compatible : Should be "xlnx,zynq-qspi-1.0".
+- reg : Physical base address and size of QSPI registers map.
+- interrupts : Property with a value describing the interrupt
+ number.
+- clock-names : List of input clock names - "ref_clk", "pclk"
+ (See clock bindings for details).
+- clocks : Clock phandles (see clock bindings for details).
+
+Optional properties:
+- num-cs : Number of chip selects used.
+
+Example:
+ qspi: spi@e000d000 {
+ compatible = "xlnx,zynq-qspi-1.0";
+ reg = <0xe000d000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 19 4>;
+ clock-names = "ref_clk", "pclk";
+ clocks = <&clkc 10>, <&clkc 43>;
+ num-cs = <1>;
+ };
--
2.7.4
