On 29/03/19 4:22 PM, Faiz Abbas wrote:
> Some controllers on TI devices requires the HISPD bit to be cleared
> even in some high speed modes. Add a quirk that facilitates this
> requirement.
Could you use sdhci I/O accessors for this?
>
> Signed-off-by: Faiz Abbas <faiz_ab...@ti.com>
> ---
> drivers/mmc/host/sdhci.c | 36 ++++++++++++++++++++++++------------
> drivers/mmc/host/sdhci.h | 2 ++
> 2 files changed, 26 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index a8141ff9be03..ed4ed6054ddf 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1916,18 +1916,30 @@ void sdhci_set_ios(struct mmc_host *mmc, struct
> mmc_ios *ios)
> ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
>
> if (!(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT)) {
> - if (ios->timing == MMC_TIMING_SD_HS ||
> - ios->timing == MMC_TIMING_MMC_HS ||
> - ios->timing == MMC_TIMING_MMC_HS400 ||
> - ios->timing == MMC_TIMING_MMC_HS200 ||
> - ios->timing == MMC_TIMING_MMC_DDR52 ||
> - ios->timing == MMC_TIMING_UHS_SDR50 ||
> - ios->timing == MMC_TIMING_UHS_SDR104 ||
> - ios->timing == MMC_TIMING_UHS_DDR50 ||
> - ios->timing == MMC_TIMING_UHS_SDR25)
> - ctrl |= SDHCI_CTRL_HISPD;
> - else
> - ctrl &= ~SDHCI_CTRL_HISPD;
> + if ((host->quirks2 & SDHCI_QUIRK2_TI_HISPD_BIT)) {
> + if (ios->timing == MMC_TIMING_MMC_HS400 ||
> + ios->timing == MMC_TIMING_MMC_HS200 ||
> + ios->timing == MMC_TIMING_MMC_DDR52 ||
> + ios->timing == MMC_TIMING_UHS_SDR50 ||
> + ios->timing == MMC_TIMING_UHS_SDR104 ||
> + ios->timing == MMC_TIMING_UHS_DDR50)
> + ctrl |= SDHCI_CTRL_HISPD;
> + else
> + ctrl &= ~SDHCI_CTRL_HISPD;
> + } else {
> + if (ios->timing == MMC_TIMING_SD_HS ||
> + ios->timing == MMC_TIMING_MMC_HS ||
> + ios->timing == MMC_TIMING_MMC_HS400 ||
> + ios->timing == MMC_TIMING_MMC_HS200 ||
> + ios->timing == MMC_TIMING_MMC_DDR52 ||
> + ios->timing == MMC_TIMING_UHS_SDR50 ||
> + ios->timing == MMC_TIMING_UHS_SDR104 ||
> + ios->timing == MMC_TIMING_UHS_DDR50 ||
> + ios->timing == MMC_TIMING_UHS_SDR25)
> + ctrl |= SDHCI_CTRL_HISPD;
> + else
> + ctrl &= ~SDHCI_CTRL_HISPD;
> + }
> }
>
> if (host->version >= SDHCI_SPEC_300) {
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 01002cba1359..aac026c5e184 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -485,6 +485,8 @@ struct sdhci_host {
> * block count.
> */
> #define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18)
> +/* Some TI devices need the high speed bit disabled even in high speed modes
> */
> +#define SDHCI_QUIRK2_TI_HISPD_BIT (1<<19)
>
> int irq; /* Device IRQ */
> void __iomem *ioaddr; /* Mapped address */
>
