4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Lamparter <chunk...@gmail.com>

commit 1eec7151ae0e134bd42e3f128066b2ff8da21393 upstream.

This belated patch implements Andrew Lunn's request of
"remove the phy_read() and phy_write() functions."
<https://lore.kernel.org/patchwork/comment/902734/>

While seemingly harmless, this causes the switch's user
port PHYs to get registered twice. This is because the
DSA subsystem will create a slave mdio-bus not knowing
that the qca8k_phy_(read|write) accessors operate on
the external mdio-bus. So the same "bus" gets effectively
duplicated.

Cc: sta...@vger.kernel.org
Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: Christian Lamparter <chunk...@gmail.com>
Signed-off-by: David S. Miller <da...@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>

---
 drivers/net/dsa/qca8k.c |   18 ------------------
 1 file changed, 18 deletions(-)

--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -630,22 +630,6 @@ qca8k_adjust_link(struct dsa_switch *ds,
        qca8k_port_set_status(priv, port, 1);
 }
 
-static int
-qca8k_phy_read(struct dsa_switch *ds, int phy, int regnum)
-{
-       struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-
-       return mdiobus_read(priv->bus, phy, regnum);
-}
-
-static int
-qca8k_phy_write(struct dsa_switch *ds, int phy, int regnum, u16 val)
-{
-       struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-
-       return mdiobus_write(priv->bus, phy, regnum, val);
-}
-
 static void
 qca8k_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
 {
@@ -961,8 +945,6 @@ static struct dsa_switch_ops qca8k_switc
        .setup                  = qca8k_setup,
        .adjust_link            = qca8k_adjust_link,
        .get_strings            = qca8k_get_strings,
-       .phy_read               = qca8k_phy_read,
-       .phy_write              = qca8k_phy_write,
        .get_ethtool_stats      = qca8k_get_ethtool_stats,
        .get_sset_count         = qca8k_get_sset_count,
        .get_eee                = qca8k_get_eee,


Reply via email to