Hi!
> .../bindings/leds/leds-class-multicolor.txt | 140 ++++++++++++++++++
> 1 file changed, 140 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
> b/Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
> new file mode 100644
> index 000000000000..4b1a26104c79
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.txt
> @@ -0,0 +1,140 @@
> +* Multicolor LED properties
> +
> +Multicolor LEDs can consist of a RGB, RGBW or a RGBA LED clusters. These
> devices
> +can be grouped together and also provide a modeling mechanism so that the
> +cluster LEDs can vary in hue and intensity to produce a wide range of colors.
> +
> +The nodes and properties defined in this document are unique to the
> multicolor
> +LED class. Common LED nodes and properties are inherited from the common.txt
> +within this documentation directory.
> +
> +Required LED Child properties:
> + - color : This is the color ID of the LED. Definitions can be found
> + in include/linux/leds/common.txt
> +
> +Optional LED Child properties:
> + - available-brightness-models : This is the phandle to the
> brightness-model
> + node(s) that this LED cluster can
> support.
> +
> +Required Brightness model properties
> + - led-brightness-model : This flag alerts the device driver and class
> + code that this node is a brightness model node
> + and to process the properties differently.
> +
> +Required Brightness model child properties
> + - model_name : This is the name of the model presented to the user.
> This
> + should be a color that the LED cluster can produce for
> + the device it is attached to.
> + - layout : This is the LED layout for the levels. This layout will
> + determine the color order of the levels. The layout and
> + level-x properties array should be the same size.
> + - level-x : These are the values for the LEDs to produce the color that
> + is defined. These values are placed in the array according
> + to the layout property.
> +led-controller@30 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "ti,lp5024";
> + reg = <0x29>;
> +
> + lp5024_model_yellow: brightness-models {
> + led-brightness-model;
> + model@0 {
> + model_name = "yellow";
> + layout = <LED_COLOR_ID_RED
> + LED_COLOR_ID_GREEN
> + LED_COLOR_ID_BLUE>;
> + level-1 = <255 227 40>;
> + level-2 = <255 240 136>;
> + level-3 = <255 247 196>;
> + };
> + };
I don't think this works. RGB LED can show millions of colors. Do you
propose to have millions of entries in dts?
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
signature.asc
Description: Digital signature
