When I boot with the following inserted: Socket 0: product info: "3Com Corporation", "3CCFE575BT", "LAN Cardbus Card", "001" manfid: 0x0101, 0x5157 function: 6 (network) Socket 1: product info: "PCMCIA ", "56K V.90 Fax Modem (LK) ", "FM560LK " manfid: 0x0175, 0x0000 function: 2 (serial) both sockets fail to set up properly and work. Linux PCMCIA Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Enabling device 00:04.0 (0000 -> 0002) PCI: Assigned IRQ 11 for device 00:04.0 PCI: Enabling device 00:04.1 (0000 -> 0002) PCI: Assigned IRQ 11 for device 00:04.1 Intel PCIC probe: not found. Yenta IRQ list 0698, PCI irq11 Socket status: 30000020 Yenta IRQ list 0698, PCI irq11 Socket status: 30000010 ACPI: System description tables not found cs: socket c118b000 timed out during reset. Try increasing setup_delay. cs: socket c118b800 timed out during reset. Try increasing setup_delay. If I then run "cardctl eject" and then eject and reinsert the two cards, the cards get set up correctly. Note that I am not using the PCMCIA drivers. I am using Yenta and its native development kernel friends. I am using modutils 2.3.22. 00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (AGP disabled) (rev 02) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ Latency: 64 set Region 0: Memory at <unassigned> (32-bit, prefetchable) [size=64M] 00:02.0 VGA compatible controller: Neomagic Corporation NM2160 [MagicGraph 128XD] (rev 01) (prog-if 00 [VGA]) Subsystem: Dell Computer Corporation: Unknown device 007e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 min, 255 max, 128 set Interrupt: pin A routed to IRQ 0 Region 0: Memory at fd000000 (32-bit, prefetchable) [size=16M] Region 1: Memory at fea00000 (32-bit, non-prefetchable) [size=2M] Region 2: Memory at fed00000 (32-bit, non-prefetchable) [size=1M] 00:04.0 CardBus bridge: Texas Instruments PCI1131 (rev 01) Subsystem: Dell Computer Corporation: Unknown device 007e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 set, cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=01, subordinate=01, sec-latency=176 Memory window 0: 10400000-107ff000 (prefetchable) Memory window 1: 10800000-10bff000 I/O window 0: 00001000-000010ff I/O window 1: 00001400-000014ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 00:04.1 CardBus bridge: Texas Instruments PCI1131 (rev 01) Subsystem: Dell Computer Corporation: Unknown device 007e Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 set, cache line size 08 Interrupt: pin B routed to IRQ 11 Region 0: Memory at 10001000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=05, subordinate=05, sec-latency=176 Memory window 0: 10c00000-10fff000 (prefetchable) Memory window 1: 11000000-113ff000 I/O window 0: 00001800-000018ff I/O window 1: 00001c00-00001cff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 00:07.0 Bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set 00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 set Region 4: I/O ports at fcf0 [size=16] 00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin D routed to IRQ 0 Region 4: I/O ports at fcc0 [disabled] [size=32] 00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- 01:00.0 Ethernet controller: 3Com Corporation 3c575 [Megahertz] 10/100 LAN CardBus (rev 01) Subsystem: 3Com Corporation: Unknown device 5b57 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 10 min, 5 max, 64 set Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 1000 [size=128] Region 1: Memory at 10800000 (32-bit, non-prefetchable) [size=128] Region 2: Memory at 10800080 (32-bit, non-prefetchable) [size=128] Expansion ROM at 10400000 [size=128K] Capabilities: [50] Power Management version 1 Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME- Status: D0 PME-Enable- DSel=0 DScale=0 PME- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/