Tony,
On 3/21/19 3:28 PM, Dan Murphy wrote:
Update the properties for the lm3532 device node for droid4.
With this change the backlight LED string and the keypad
LED strings will be controlled separately.
Signed-off-by: Dan Murphy <dmur...@ti.com>
---
v5 - No change - https://lore.kernel.org/patchwork/patch/1050409/
v4 - No change - https://lore.kernel.org/patchwork/patch/1050125/
v3 - updated keypad label on v1 comment -
https://lore.kernel.org/patchwork/patch/1049023/
v2 - Fixed ramp-up and ramp-down properties, removed hard coded property values,
I did not change the label as it is undecided what it could be -
https://lore.kernel.org/patchwork/patch/1048806/
arch/arm/boot/dts/omap4-droid4-xt894.dts | 26 ++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts
b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index e21ec929f096..aea206f04f76 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -383,20 +383,30 @@
};
&i2c1 {
- lm3532@38 {
+ led-controller@38 {
compatible = "ti,lm3532";
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x38>;
enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
- lcd_backlight: backlight {
- compatible = "ti,lm3532-backlight";
+ ramp-up-us = <1024>;
+ ramp-down-us = <8193>;
- lcd {
- led-sources = <0 1 2>;
- ramp-up-msec = <1>;
- ramp-down-msec = <0>;
- };
Since I'll be creating integration branch for this series,
and it would be good to have this patch in it too, then
I can do the amendments by myself:
+ lcd_backlight: led@0 {
+ reg = <0>;
+ led-sources = <2>;
+ ti,led-mode = <0>;
+ label = "backlight";
s/backlight/:backlight/
+ linux,default-trigger = "backlight";
+ };
+
+ led@1 {
+ reg = <1>;
+ led-sources = <1>;
+ ti,led-mode = <0>;
+ label = "platform::kbd_backlight";
s/platform::kbd_backlight/:kbd_backlight/
and then send you a pull request.
Would you be OK with that?
};
};
};
--
Best regards,
Jacek Anaszewski
