[PATCH v3 6/6] arm64: dts: allwinner: h6: pine64: Add PIO regulators

[Clément Péron]

Add PIO regulators for Pine64 board.

Signed-off-by: Clément Péron <peron.c...@gmail.com>
---
 .../boot/dts/allwinner/sun50i-h6-pine-h64.dts   | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts 
b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 4802902e128f..6f2d9adf4f10 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -127,6 +127,12 @@
        status = "okay";
 };
 
+&pio {
+       vcc-pc-supply = <&reg_bldo2>;
+       vcc-pd-supply = <&reg_cldo1>;
+       vcc-pg-supply = <&reg_bldo2>;
+};
+
 &r_i2c {
        status = "okay";
 
@@ -247,6 +253,17 @@
        };
 };
 
+&r_pio {
+       /*
+        * PL0 and PL1 are used for PMIC I2C
+        * don't enable the pl-supply else
+        * it will fail at boot
+        *
+        * vcc-pl-supply = <&reg_aldo1>;
+        */
+       vcc-pm-supply = <&reg_bldo2>;
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_ph_pins>;
-- 
2.17.1