Due to new challenges in my life I can no longer take care of SIOX.
Thorsten takes over my SIOX tasks.

Signed-off-by: Gavin Schenk <[email protected]>
---
 Documentation/ABI/testing/sysfs-bus-siox | 22 +++++++++++-----------
 MAINTAINERS                              |  2 +-
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-siox 
b/Documentation/ABI/testing/sysfs-bus-siox
index fed7c3765a4e..c2a403f20b90 100644
--- a/Documentation/ABI/testing/sysfs-bus-siox
+++ b/Documentation/ABI/testing/sysfs-bus-siox
@@ -1,6 +1,6 @@
 What:          /sys/bus/siox/devices/siox-X/active
 KernelVersion: 4.16
-Contact:       Gavin Schenk <[email protected]>, Uwe Kleine-König 
<[email protected]>
+Contact:       Thorsten Scherer <[email protected]>, Uwe Kleine-König 
<[email protected]>
 Description:
                On reading represents the current state of the bus. If it
                contains a "0" the bus is stopped and connected devices are
@@ -12,7 +12,7 @@ Description:
 
 What:          /sys/bus/siox/devices/siox-X/device_add
 KernelVersion: 4.16
-Contact:       Gavin Schenk <[email protected]>, Uwe Kleine-König 
<[email protected]>
+Contact:       Thorsten Scherer <[email protected]>, Uwe Kleine-König 
<[email protected]>
 Description:
                Write-only file. Write
 
@@ -27,13 +27,13 @@ Description:
 
 What:          /sys/bus/siox/devices/siox-X/device_remove
 KernelVersion: 4.16
-Contact:       Gavin Schenk <[email protected]>, Uwe Kleine-König 
<[email protected]>
+Contact:       Thorsten Scherer <[email protected]>, Uwe Kleine-König 
<[email protected]>
 Description:
                Write-only file. A single write removes the last device in the 
siox chain.
 
 What:          /sys/bus/siox/devices/siox-X/poll_interval_ns
 KernelVersion: 4.16
-Contact:       Gavin Schenk <[email protected]>, Uwe Kleine-König 
<[email protected]>
+Contact:       Thorsten Scherer <[email protected]>, Uwe Kleine-König 
<[email protected]>
 Description:
                Defines the interval between two poll cycles in nano seconds.
                Note this is rounded to jiffies on writing. On reading the 
current value
@@ -41,33 +41,33 @@ Description:
 
 What:          /sys/bus/siox/devices/siox-X-Y/connected
 KernelVersion: 4.16
-Contact:       Gavin Schenk <[email protected]>, Uwe Kleine-König 
<[email protected]>
+Contact:       Thorsten Scherer <[email protected]>, Uwe Kleine-König 
<[email protected]>
 Description:
                Read-only value. "0" means the Yth device on siox bus X isn't 
"connected" i.e.
                communication with it is not ensured. "1" signals a working 
connection.
 
 What:          /sys/bus/siox/devices/siox-X-Y/inbytes
 KernelVersion: 4.16
-Contact:       Gavin Schenk <[email protected]>, Uwe Kleine-König 
<[email protected]>
+Contact:       Thorsten Scherer <[email protected]>, Uwe Kleine-König 
<[email protected]>
 Description:
                Read-only value reporting the inbytes value provided to 
siox-X/device_add
 
 What:          /sys/bus/siox/devices/siox-X-Y/status_errors
 KernelVersion: 4.16
-Contact:       Gavin Schenk <[email protected]>, Uwe Kleine-König 
<[email protected]>
+Contact:       Thorsten Scherer <[email protected]>, Uwe Kleine-König 
<[email protected]>
 Description:
                Counts the number of time intervals when the read status byte 
doesn't yield the
                expected value.
 
 What:          /sys/bus/siox/devices/siox-X-Y/type
 KernelVersion: 4.16
-Contact:       Gavin Schenk <[email protected]>, Uwe Kleine-König 
<[email protected]>
+Contact:       Thorsten Scherer <[email protected]>, Uwe Kleine-König 
<[email protected]>
 Description:
                Read-only value reporting the type value provided to 
siox-X/device_add.
 
 What:          /sys/bus/siox/devices/siox-X-Y/watchdog
 KernelVersion: 4.16
-Contact:       Gavin Schenk <[email protected]>, Uwe Kleine-König 
<[email protected]>
+Contact:       Thorsten Scherer <[email protected]>, Uwe Kleine-König 
<[email protected]>
 Description:
                Read-only value reporting if the watchdog of the siox device is
                active. "0" means the watchdog is not active and the device is 
expected to
@@ -75,13 +75,13 @@ Description:
 
 What:          /sys/bus/siox/devices/siox-X-Y/watchdog_errors
 KernelVersion: 4.16
-Contact:       Gavin Schenk <[email protected]>, Uwe Kleine-König 
<[email protected]>
+Contact:       Thorsten Scherer <[email protected]>, Uwe Kleine-König 
<[email protected]>
 Description:
                Read-only value reporting the number to time intervals when the
                watchdog was active.
 
 What:          /sys/bus/siox/devices/siox-X-Y/outbytes
 KernelVersion: 4.16
-Contact:       Gavin Schenk <[email protected]>, Uwe Kleine-König 
<[email protected]>
+Contact:       Thorsten Scherer <[email protected]>, Uwe Kleine-König 
<[email protected]>
 Description:
                Read-only value reporting the outbytes value provided to 
siox-X/device_add.
diff --git a/MAINTAINERS b/MAINTAINERS
index 43b36dbed48e..34156d1c6468 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14191,7 +14191,7 @@ F:      lib/test_siphash.c
 F:     include/linux/siphash.h
 
 SIOX
-M:     Gavin Schenk <[email protected]>
+M:     Thorsten Scherer <[email protected]>
 M:     Uwe Kleine-König <[email protected]>
 R:     Pengutronix Kernel Team <[email protected]>
 S:     Supported
-- 
2.20.1

Reply via email to