Hi, Aisheng

Best Regards!
Anson Huang

> -----Original Message-----
> From: Aisheng Dong
> Sent: 2019年4月8日 18:35
> To: Anson Huang <anson.hu...@nxp.com>; robh...@kernel.org;
> mark.rutl...@arm.com; shawn...@kernel.org; s.ha...@pengutronix.de;
> ker...@pengutronix.de; feste...@gmail.com; a.zu...@towertech.it;
> alexandre.bell...@bootlin.com; ulf.hans...@linaro.org; Daniel Baluta
> <daniel.bal...@nxp.com>; devicet...@vger.kernel.org; linux-
> ker...@vger.kernel.org; linux-arm-ker...@lists.infradead.org; linux-
> r...@vger.kernel.org
> Cc: dl-linux-imx <linux-...@nxp.com>
> Subject: RE: [PATCH V5 2/4] firmware: imx: enable imx scu general irq
> function
> 
> > From: Anson Huang
> > Sent: Monday, March 18, 2019 11:10 AM
> >
> > The System Controller Firmware (SCFW) controls RTC, thermal and WDOG
> > etc., these resources' interrupt function are managed by SCU. When any
> > IRQ pending, SCU will notify Linux via MU general interrupt channel
> > #3, and Linux kernel needs to call SCU APIs to get IRQ status and
> > notify each module to handle the interrupt.
> >
> > Since there is no data transmission for SCU IRQ notification, so
> > doorbell mode is used for this MU channel, and SCU driver will use
> > notifier mechanism to broadcast to every module which registers the SCU
> block notifier.
> >
> > Signed-off-by: Anson Huang <anson.hu...@nxp.com>
> 
> This patch mostly looks good me, except a few minor comments.
> Otherwise, you can add my tag.
> 
> Reviewed-by: Dong Aisheng <aisheng.d...@nxp.com>
> 
> > ---
> > Changes since V4:
> >     - move scu irq support to a new file imx-scu-irq.c;
> >     - improve the function name with "imx_scu_irq_" as prefix for irq
> > related functions;
> >     - move MU IRQ sources id out of sc ipc struct;
> >     - add IRQ group info message print when get irq status fail;
> >     - move MU ID parse into imx_scu_enable_general_irq_channel()
> function
> > and ONLY do it
> >       when irq channel enable successfully.
> >     - change max IRQ group supported to 4, ONLY support for those
> kernel
> > features.
> > ---
> >  drivers/firmware/imx/Makefile      |   2 +-
> >  drivers/firmware/imx/imx-scu-irq.c | 133
> > +++++++++++++++++++++++++++++++++++++
> >  drivers/firmware/imx/imx-scu.c     |   6 ++
> >  include/linux/firmware/imx/sci.h   |   4 ++
> >  4 files changed, 144 insertions(+), 1 deletion(-)  create mode 100644
> > drivers/firmware/imx/imx-scu-irq.c
> >
> > diff --git a/drivers/firmware/imx/Makefile
> > b/drivers/firmware/imx/Makefile index 1b2e15b..802c4ad 100644
> > --- a/drivers/firmware/imx/Makefile
> > +++ b/drivers/firmware/imx/Makefile
> > @@ -1,3 +1,3 @@
> >  # SPDX-License-Identifier: GPL-2.0
> > -obj-$(CONFIG_IMX_SCU)              += imx-scu.o misc.o
> > +obj-$(CONFIG_IMX_SCU)              += imx-scu.o misc.o imx-scu-irq.o
> >  obj-$(CONFIG_IMX_SCU_PD)   += scu-pd.o
> > diff --git a/drivers/firmware/imx/imx-scu-irq.c
> > b/drivers/firmware/imx/imx-scu-irq.c
> > new file mode 100644
> > index 0000000..0e20aa7
> > --- /dev/null
> > +++ b/drivers/firmware/imx/imx-scu-irq.c
> > @@ -0,0 +1,133 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2019 NXP
> > + *
> > + * Implementation of the SCU IRQ functions using MU.
> > + *
> > + */
> > +
> > +#include <dt-bindings/firmware/imx/rsrc.h> #include
> > +<linux/firmware/imx/ipc.h> #include <linux/mailbox_client.h>
> > +
> > +#define IMX_SC_IRQ_FUNC_STATUS     2
> > +#define IMX_SC_IRQ_NUM_GROUP       4
> > +
> > +static u32 mu_resource_id;
> > +
> > +struct imx_sc_msg_irq_get_status {
> > +   struct imx_sc_rpc_msg hdr;
> > +   union {
> > +           struct {
> > +                   u16 resource;
> > +                   u8 group;
> > +                   u8 reserved;
> > +           } __packed req;
> > +           struct {
> > +                   u32 status;
> > +           } resp;
> > +   } data;
> > +};
> > +
> > +static struct imx_sc_ipc *imx_sc_irq_ipc_handle; static struct
> > +work_struct imx_sc_irq_work; static
> > +BLOCKING_NOTIFIER_HEAD(imx_scu_irq_notifier_chain);
> > +
> > +int imx_scu_irq_register_notifier(struct notifier_block *nb) {
> > +   return blocking_notifier_chain_register(
> 
> We probably can use atomic_notifier_call_chain as it's used for irq function.

Agree, it makes more sense to use it in interrupt context. Will update it in V6.

> 
> > +           &imx_scu_irq_notifier_chain, nb);
> > +}
> > +EXPORT_SYMBOL(imx_scu_irq_register_notifier);
> > +
> > +int imx_scu_irq_unregister_notifier(struct notifier_block *nb) {
> > +   return blocking_notifier_chain_unregister(
> > +           &imx_scu_irq_notifier_chain, nb);
> > +}
> > +EXPORT_SYMBOL(imx_scu_irq_unregister_notifier);
> > +
> > +static int imx_scu_irq_notifier_call_chain(unsigned long status, u8
> > +*group) {
> > +   return blocking_notifier_call_chain(&imx_scu_irq_notifier_chain,
> > +           status, (void *)group);
> > +}
> > +
> > +static void imx_scu_irq_work_handler(struct work_struct *work) {
> > +   struct imx_sc_msg_irq_get_status msg;
> > +   struct imx_sc_rpc_msg *hdr = &msg.hdr;
> > +   u32 irq_status;
> > +   int ret;
> > +   u8 i;
> > +
> > +   for (i = 0; i < IMX_SC_IRQ_NUM_GROUP; i++) {
> > +           hdr->ver = IMX_SC_RPC_VERSION;
> > +           hdr->svc = IMX_SC_RPC_SVC_IRQ;
> > +           hdr->func = IMX_SC_IRQ_FUNC_STATUS;
> > +           hdr->size = 2;
> > +
> > +           msg.data.req.resource = mu_resource_id;
> > +           msg.data.req.group = i;
> > +
> > +           ret = imx_scu_call_rpc(imx_sc_irq_ipc_handle, &msg, true);
> > +           if (ret) {
> > +                   pr_err("get irq group %d status failed, ret %d\n",
> > +                          i, ret);
> > +                   return;
> > +           }
> > +
> > +           irq_status = msg.data.resp.status;
> > +           if (!irq_status)
> > +                   continue;
> > +
> > +           imx_scu_irq_notifier_call_chain(irq_status, &i);
> > +   }
> > +}
> > +
> > +static void imx_scu_irq_callback(struct mbox_client *c, void *msg) {
> > +   schedule_work(&imx_sc_irq_work);
> > +}
> > +
> > +int imx_scu_enable_general_irq_channel(struct device *dev) {
> > +   struct of_phandle_args spec;
> > +   struct mbox_client *cl;
> > +   struct mbox_chan *ch;
> > +   int ret = 0, i = 0;
> > +
> > +   cl = devm_kzalloc(dev, sizeof(*cl), GFP_KERNEL);
> > +   if (!cl)
> > +           return -ENOMEM;
> > +
> > +   cl->dev = dev;
> > +   cl->rx_callback = imx_scu_irq_callback;
> > +
> > +   /* SCU general IRQ uses general interrupt channel 3 */
> > +   ch = mbox_request_channel_byname(cl, "gip3");
> > +   if (IS_ERR(ch)) {
> > +           ret = PTR_ERR(ch);
> > +           dev_err(dev, "failed to request mbox chan gip3, ret %d\n",
> ret);
> 
> There may be memory leak as this function is optional in imx-scu.c.
> So here seems to miss a devm_kfree

Correct, I need to handle it, will add it in V6.

Thanks,
Anson.

> 
> Regards
> Dong Aisheng
> 
> > +           return ret;
> > +   }
> > +
> > +   ret = imx_scu_get_handle(&imx_sc_irq_ipc_handle);
> > +   if (ret)
> > +           return ret;
> > +
> > +   INIT_WORK(&imx_sc_irq_work, imx_scu_irq_work_handler);
> > +
> > +   if (!of_parse_phandle_with_args(dev->of_node, "mboxes",
> > +                                  "#mbox-cells", 0, &spec))
> > +           i = of_alias_get_id(spec.np, "mu");
> > +
> > +   /* use mu1 as general mu irq channel if failed */
> > +   if (i < 0)
> > +           i = 1;
> > +
> > +   mu_resource_id = IMX_SC_R_MU_0A + i;
> > +
> > +   return ret;
> > +}
> > +EXPORT_SYMBOL(imx_scu_enable_general_irq_channel);
> > diff --git a/drivers/firmware/imx/imx-scu.c
> > b/drivers/firmware/imx/imx-scu.c index 2bb1a19..04a24a8 100644
> > --- a/drivers/firmware/imx/imx-scu.c
> > +++ b/drivers/firmware/imx/imx-scu.c
> > @@ -10,6 +10,7 @@
> >  #include <linux/err.h>
> >  #include <linux/firmware/imx/types.h>  #include
> > <linux/firmware/imx/ipc.h>
> > +#include <linux/firmware/imx/sci.h>
> >  #include <linux/interrupt.h>
> >  #include <linux/irq.h>
> >  #include <linux/kernel.h>
> > @@ -246,6 +247,11 @@ static int imx_scu_probe(struct platform_device
> > *pdev)
> >
> >     imx_sc_ipc_handle = sc_ipc;
> >
> > +   ret = imx_scu_enable_general_irq_channel(dev);
> > +   if (ret)
> > +           dev_warn(dev,
> > +                   "failed to enable general irq channel: %d\n", ret);
> > +
> >     dev_info(dev, "NXP i.MX SCU Initialized\n");
> >
> >     return devm_of_platform_populate(dev); diff --git
> > a/include/linux/firmware/imx/sci.h b/include/linux/firmware/imx/sci.h
> > index ebc5509..918fa16 100644
> > --- a/include/linux/firmware/imx/sci.h
> > +++ b/include/linux/firmware/imx/sci.h
> > @@ -15,4 +15,8 @@
> >
> >  #include <linux/firmware/imx/svc/misc.h>  #include
> > <linux/firmware/imx/svc/pm.h>
> > +
> > +int imx_scu_enable_general_irq_channel(struct device *dev); int
> > +imx_scu_irq_register_notifier(struct notifier_block *nb); int
> > +imx_scu_irq_unregister_notifier(struct notifier_block *nb);
> >  #endif /* _SC_SCI_H */
> > --
> > 2.7.4

Reply via email to