Hi Dan,
Regulator maintainers should be added too.
On 4/5/19 4:55 PM, Dan Murphy wrote:
The use of and enablement of the GPIO can be used across devices.
Use the enable_reg in the regulator descriptor for the register to
write.
Signed-off-by: Dan Murphy <[email protected]>
---
drivers/regulator/lm363x-regulator.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/lm363x-regulator.c
b/drivers/regulator/lm363x-regulator.c
index c876e161052a..382b1cecdd93 100644
--- a/drivers/regulator/lm363x-regulator.c
+++ b/drivers/regulator/lm363x-regulator.c
@@ -263,8 +263,8 @@ static int lm363x_regulator_probe(struct platform_device
*pdev)
if (gpiod) {
cfg.ena_gpiod = gpiod;
-
- ret = regmap_update_bits(regmap, LM3632_REG_BIAS_CONFIG,
+ ret = regmap_update_bits(regmap,
+ lm363x_regulator_desc[id].enable_reg,
LM3632_EXT_EN_MASK,
LM3632_EXT_EN_MASK);
if (ret) {
--
Best regards,
Jacek Anaszewski
