Add i.MX8QXP CPU thermal zone support.
Signed-off-by: Anson Huang <anson.hu...@nxp.com>
---
Changes since V10:
- remove property "imx,sensor-resource-id" and put HW resource ID
inside each
thermal-sensors' phandle argument.
---
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 33 ++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 70ef3db..cc1d877 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/pads-imx8qxp.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
@@ -149,6 +150,11 @@
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
+
+ tsens: thermal-sensor {
+ compatible = "fsl,imx8qxp-sc-thermal",
"fsl,imx-sc-thermal";
+ #thermal-sensor-cells = <1>;
+ };
};
timer {
@@ -484,4 +490,31 @@
power-domains = <&pd IMX_SC_R_GPIO_7>;
};
};
+
+ thermal_zones: thermal-zones {
+ cpu-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <107000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit0: trip1 {
+ temperature = <127000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&A35_0 THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
};
--
2.7.4
