On 28-03-19, 20:58, Sibi Sankar wrote:
> Add support to parse and update OPP tables attached to the cpu nodes.
>
> Signed-off-by: Sibi Sankar <si...@codeaurora.org>
> ---
> drivers/cpufreq/qcom-cpufreq-hw.c | 29 +++++++++++++++++++++++++++--
> 1 file changed, 27 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c
> b/drivers/cpufreq/qcom-cpufreq-hw.c
> index 4b0b50403901..5c268dd2346c 100644
> --- a/drivers/cpufreq/qcom-cpufreq-hw.c
> +++ b/drivers/cpufreq/qcom-cpufreq-hw.c
> @@ -73,6 +73,25 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct
> cpufreq_policy *policy,
> return policy->freq_table[index].frequency;
> }
>
> +static int qcom_find_update_opp(struct device *cpu_dev, unsigned long freq,
> + unsigned long volt)
> +{
> + int ret;
> + struct dev_pm_opp *opp;
> +
> + opp = dev_pm_opp_find_freq_exact(cpu_dev, freq, true);
> + if (IS_ERR(opp)) {
> + ret = dev_pm_opp_add(cpu_dev, freq, volt);
With my comment on the other patch, you can just call
dev_pm_opp_update_voltage() and if that fails then call dev_pm_opp_add().
> + } else {
> + dev_pm_opp_disable(cpu_dev, freq);
> + ret = dev_pm_opp_update_voltage(cpu_dev, freq, volt);
> + dev_pm_opp_enable(cpu_dev, freq);
Perhaps no one else should be using the CPU OPP table at this point of time and
so we can get away with disable and enable stuff ? Just add a comment on why
that works.
> + dev_pm_opp_put(opp);
> + }
> +
> + return ret;
> +}
> +
> static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
> struct cpufreq_policy *policy,
> void __iomem *base)
> @@ -81,11 +100,16 @@ static int qcom_cpufreq_hw_read_lut(struct device
> *cpu_dev,
> u32 volt;
> unsigned int max_cores = cpumask_weight(policy->cpus);
> struct cpufreq_frequency_table *table;
> + int ret;
>
> table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL);
> if (!table)
> return -ENOMEM;
>
> + ret = dev_pm_opp_of_add_table(cpu_dev);
> + if (ret)
> + dev_dbg(cpu_dev, "Couldn't add OPP table\n");
> +
> for (i = 0; i < LUT_MAX_ENTRIES; i++) {
> data = readl_relaxed(base + REG_FREQ_LUT +
> i * LUT_ROW_SIZE);
> @@ -104,7 +128,7 @@ static int qcom_cpufreq_hw_read_lut(struct device
> *cpu_dev,
>
> if (freq != prev_freq && core_count == max_cores) {
> table[i].frequency = freq;
> - dev_pm_opp_add(cpu_dev, freq * 1000, volt);
> + qcom_find_update_opp(cpu_dev, freq * 1000, volt);
> dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i,
> freq, core_count);
> } else {
> @@ -125,7 +149,8 @@ static int qcom_cpufreq_hw_read_lut(struct device
> *cpu_dev,
> if (prev_cc != max_cores) {
> prev->frequency = prev_freq;
> prev->flags = CPUFREQ_BOOST_FREQ;
> - dev_pm_opp_add(cpu_dev, prev_freq * 1000, volt);
> + qcom_find_update_opp(cpu_dev, prev_freq * 1000,
> + volt);
> }
>
> break;
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
--
viresh
