Hi, Shawn
Can you pick up this patch series if no additional comments? We need
this feature to support many modules IRQ function including suspend/resume,
thanks.
Best Regards!
Anson Huang
> -----Original Message-----
> From: Anson Huang
> Sent: 2019年4月9日 13:00
> To: robh...@kernel.org; mark.rutl...@arm.com; shawn...@kernel.org;
> s.ha...@pengutronix.de; ker...@pengutronix.de; feste...@gmail.com;
> a.zu...@towertech.it; alexandre.bell...@bootlin.com; Aisheng Dong
> <aisheng.d...@nxp.com>; ulf.hans...@linaro.org; sb...@kernel.org; Peng
> Fan <peng....@nxp.com>; Daniel Baluta <daniel.bal...@nxp.com>;
> devicet...@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-
> ker...@lists.infradead.org; linux-...@vger.kernel.org
> Cc: dl-linux-imx <linux-...@nxp.com>
> Subject: [PATCH V7 1/4] dt-bindings: fsl: scu: add general interrupt support
>
> Add scu general interrupt function support.
>
> Signed-off-by: Anson Huang <anson.hu...@nxp.com>
> Reviewed-by: Rob Herring <r...@kernel.org>
> Reviewed-by: Dong Aisheng <aisheng.d...@nxp.com>
> ---
> No changes.
> ---
> .../devicetree/bindings/arm/freescale/fsl,scu.txt | 29 +++++++++++++++++--
> ---
> 1 file changed, 23 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> index 72d481c..5d7dbab 100644
> --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> @@ -22,9 +22,11 @@ Required properties:
> -------------------
> - compatible: should be "fsl,imx-scu".
> - mbox-names: should include "tx0", "tx1", "tx2", "tx3",
> - "rx0", "rx1", "rx2", "rx3".
> -- mboxes: List of phandle of 4 MU channels for tx and 4 MU channels
> - for rx. All 8 MU channels must be in the same MU instance.
> + "rx0", "rx1", "rx2", "rx3";
> + include "gip3" if want to support general MU interrupt.
> +- mboxes: List of phandle of 4 MU channels for tx, 4 MU channels for
> + rx, and 1 optional MU channel for general interrupt.
> + All MU channels must be in the same MU instance.
> Cross instances are not allowed. The MU instance can only
> be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users
> need
> to make sure use the one which is not conflict with other @@
> -34,6 +36,7 @@ Required properties:
> Channel 1 must be "tx1" or "rx1".
> Channel 2 must be "tx2" or "rx2".
> Channel 3 must be "tx3" or "rx3".
> + General interrupt rx channel must be "gip3".
> e.g.
> mboxes = <&lsio_mu1 0 0
> &lsio_mu1 0 1
> @@ -42,10 +45,18 @@ Required properties:
> &lsio_mu1 1 0
> &lsio_mu1 1 1
> &lsio_mu1 1 2
> - &lsio_mu1 1 3>;
> + &lsio_mu1 1 3
> + &lsio_mu1 3 3>;
> See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
> for detailed mailbox binding.
>
> +Note: Each mu which supports general interrupt should have an alias
> +correctly numbered in "aliases" node.
> +e.g.
> +aliases {
> + mu1 = &lsio_mu1;
> +};
> +
> i.MX SCU Client Device Node:
> ============================================================
>
> @@ -124,6 +135,10 @@ Required properties:
>
> Example (imx8qxp):
> -------------
> +aliases {
> + mu1 = &lsio_mu1;
> +};
> +
> lsio_mu1: mailbox@5d1c0000 {
> ...
> #mbox-cells = <2>;
> @@ -133,7 +148,8 @@ firmware {
> scu {
> compatible = "fsl,imx-scu";
> mbox-names = "tx0", "tx1", "tx2", "tx3",
> - "rx0", "rx1", "rx2", "rx3";
> + "rx0", "rx1", "rx2", "rx3",
> + "gip3";
> mboxes = <&lsio_mu1 0 0
> &lsio_mu1 0 1
> &lsio_mu1 0 2
> @@ -141,7 +157,8 @@ firmware {
> &lsio_mu1 1 0
> &lsio_mu1 1 1
> &lsio_mu1 1 2
> - &lsio_mu1 1 3>;
> + &lsio_mu1 1 3
> + &lsio_mu1 3 3>;
>
> clk: clk {
> compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
> --
> 2.7.4
