Am Sonntag, den 14.04.2019, 17:46 -0700 schrieb Andrey Smirnov:
> All calls to imx6_pcie_wait_for_link() share the same error path and
> the state of PHY debug registers will already be printed there, so
> there's no real reason we can't just use dw_pcie_wait_for_link(). Drop
> imx6_pcie_wait_for_link() and replace it with dw_pcie_wait_for_link().
>
> > Signed-off-by: Andrey Smirnov <andrew.smir...@gmail.com>
> > Suggested-by: Lucas Stach <l.st...@pengutronix.de>
> > Cc: Lorenzo Pieralisi <lorenzo.pieral...@arm.com>
> > Cc: Bjorn Helgaas <bhelg...@google.com>
> > Cc: Chris Healy <cphe...@gmail.com>
> > Cc: Lucas Stach <l.st...@pengutronix.de>
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-...@vger.kernel.org
Reviewed-by: Lucas Stach <l.st...@pengutronix.de>
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 19 ++-----------------
> 1 file changed, 2 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> b/drivers/pci/controller/dwc/pci-imx6.c
> index ea2617712a3b..bb3dcfdbf697 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -723,21 +723,6 @@ static int imx6_setup_phy_mpll(struct imx6_pcie
> *imx6_pcie)
> > return 0;
> }
>
> -static int imx6_pcie_wait_for_link(struct imx6_pcie *imx6_pcie)
> -{
> > - struct dw_pcie *pci = imx6_pcie->pci;
> > - struct device *dev = pci->dev;
> -
> > - /* check if the link is up or not */
> > - if (!dw_pcie_wait_for_link(pci))
> > - return 0;
> -
> > - dev_dbg(dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
> > - dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R0),
> > - dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1));
> > - return -ETIMEDOUT;
> -}
> -
> static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
> {
> > struct dw_pcie *pci = imx6_pcie->pci;
> @@ -796,7 +781,7 @@ static int imx6_pcie_establish_link(struct imx6_pcie
> *imx6_pcie)
> > /* Start LTSSM. */
> > imx6_pcie_ltssm_enable(dev);
>
> > - ret = imx6_pcie_wait_for_link(imx6_pcie);
> > + ret = dw_pcie_wait_for_link(pci);
> > if (ret)
> > goto err_reset_phy;
>
> @@ -834,7 +819,7 @@ static int imx6_pcie_establish_link(struct imx6_pcie
> *imx6_pcie)
> > }
>
> > /* Make sure link training is finished as well! */
> > - ret = imx6_pcie_wait_for_link(imx6_pcie);
> > + ret = dw_pcie_wait_for_link(pci);
> > if (ret) {
> > dev_err(dev, "Failed to bring link up!\n");
> > goto err_reset_phy;
