Hi,
Le jeudi 14 mars 2019 à 14:05 +0100, Paul Kocialkowski a écrit :
> On platforms where the MUSB and HCI controllers share PHY0, PHY passby
> is required when using the HCI controller with the PHY, but it must be
> disabled when the MUSB controller is used instead.
>
> Without this, PHY0 passby is always enabled, which results in broken
> peripheral mode on such platforms (e.g. H3/H5).
>
> Fixes: ba4bdc9e1dc0 ("PHY: sunxi: Add driver for sunxi usb phy")
Does anyone have feedback about this? I was hoping to get it merged
rather soon since it pretty much fixes USB gadget on H3/R40/V3/V3s.
Cheers,
Paul
> Signed-off-by: Paul Kocialkowski <[email protected]>
> ---
> drivers/phy/allwinner/phy-sun4i-usb.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c
> b/drivers/phy/allwinner/phy-sun4i-usb.c
> index 5163097b43df..7b23920e0068 100644
> --- a/drivers/phy/allwinner/phy-sun4i-usb.c
> +++ b/drivers/phy/allwinner/phy-sun4i-usb.c
> @@ -551,6 +551,7 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct
> work_struct *work)
> struct sun4i_usb_phy_data *data =
> container_of(work, struct sun4i_usb_phy_data, detect.work);
> struct phy *phy0 = data->phys[0].phy;
> + struct sun4i_usb_phy *phy = phy_get_drvdata(phy0);
> bool force_session_end, id_notify = false, vbus_notify = false;
> int id_det, vbus_det;
>
> @@ -607,6 +608,9 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct
> work_struct *work)
> mutex_unlock(&phy0->mutex);
> }
>
> + /* Enable PHY0 passby for host mode only. */
> + sun4i_usb_phy_passby(phy, !id_det);
> +
> /* Re-route PHY0 if necessary */
> if (data->cfg->phy0_dual_route)
> sun4i_usb_phy0_reroute(data, id_det);
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
