[PATCH 4.19 097/101] arm64: dts: rockchip: fix vcc_host1_5v pin assign on rk3328-rock64

[Greg Kroah-Hartman]

From: Katsuhiro Suzuki <katsuh...@katsuster.net>

commit ef05bcb60c1a8841e38c91923ba998181117a87c upstream.

This patch fixes pin assign of vcc_host1_5v. This regulator is
controlled by USB20_HOST_DRV signal.

ROCK64 schematic says that GPIO0_A2 pin is used as USB20_HOST_DRV.
GPIO0_D3 pin is for SPDIF_TX_M0.

Signed-off-by: Katsuhiro Suzuki <katsuh...@katsuster.net>
Signed-off-by: Heiko Stuebner <he...@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>

---
 arch/arm64/boot/dts/rockchip/rk3328-rock64.dts |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -46,7 +46,7 @@
        vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
                compatible = "regulator-fixed";
                enable-active-high;
-               gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+               gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&usb20_host_drv>;
                regulator-name = "vcc_host1_5v";
@@ -238,7 +238,7 @@
 
        usb2 {
                usb20_host_drv: usb20-host-drv {
-                       rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+                       rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
                };
        };