This is the development kit board for the Librem 5. The current level of
support yields a working console and is able to boot userspace from the
Network or eMMC.

Additional subsystems that are active :

- Both USB ports
- SD card socket
- WiFi usdhc
- WWAN modem
- GNSS
- GPIO keys
- LEDs
- gyro
- magnetometer
- touchscreen
- pwm
- backlight
- haptic motor

Signed-off-by: Angus Ainslie (Purism) <an...@akkea.ca>
---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx8mq-librem5-devkit.dts   | 822 ++++++++++++++++++
 2 files changed, 823 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile 
b/arch/arm64/boot/dts/freescale/Makefile
index 0bd122f60549..c043aca66572 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts 
b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
new file mode 100644
index 000000000000..dd705b6b94a4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -0,0 +1,822 @@
+/* SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright 2018-2019 Purism SPC
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+#include "dt-bindings/usb/pd.h"
+#include "dt-bindings/input/input.h"
+
+/ {
+       model = "Purism Librem 5 devkit";
+       compatible = "purism,librem5-devkit", "fsl,imx8mq";
+
+       backlight_dsi: backlight-dsi {
+               compatible = "pwm-backlight";
+               /* 200 Hz for the PAM2841 */
+               pwms = <&pwm1 0 5000000>;
+               brightness-levels = <0 100>;
+               num-interpolated-steps = <100>;
+               /* Default brightness level (index into the array defined by */
+               /* the "brightness-levels" property) */
+               default-brightness-level = <0>;
+               power-supply = <&reg_22V4_P>;
+       };
+
+       chosen {
+               stdout-path = &uart1;
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_gpio_keys>;
+
+               btn1 {
+                       label = "VOL_UP";
+                       gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+                       gpio-key,wakeup;
+                       linux,code = <KEY_VOLUMEUP>;
+               };
+
+               btn2 {
+                       label = "VOL_DOWN";
+                       gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+                       gpio-key,wakeup;
+                       linux,code = <KEY_VOLUMEDOWN>;
+               };
+
+               hp_det {
+                       label = "HP_DET";
+                       gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+                       gpio-key,wakeup;
+                       linux,code = <KEY_HP>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_gpio_leds>;
+               status = "okay";
+
+               led1 {
+                       label = "LED 1";
+                       gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+                       default-state = "off";
+               };
+       };
+
+       pmic_osc: pmic-osc {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <32768>;
+               clock-output-names = "pmic_osc";
+       };
+
+       pwmleds {
+               compatible = "pwm-leds";
+               haptic {
+                       label = "librem5::haptic";
+                       pwms = <&pwm2 0 200000>;
+                       active-low;
+                       max-brightness = <255>;
+                       power-supply = <&reg_3V3_P>;
+               };
+       };
+
+       reg_1V8_P: regulator-1V8-P {
+               compatible = "regulator-fixed";
+               regulator-name = "1V8_P";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               vin-supply = <&reg_vbat>;
+               en-supply = <&reg_pwr_en>;
+       };
+
+       reg_2V8_P: regulator-2V8-P {
+               compatible = "regulator-fixed";
+               regulator-name = "2V8_P";
+               regulator-min-microvolt = <2800000>;
+               regulator-max-microvolt = <2800000>;
+               vin-supply = <&reg_3V3_P>;
+       };
+
+       reg_3V3_P: regulator-3V3-P {
+               compatible = "regulator-fixed";
+               regulator-name = "3V3_P";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               vin-supply = <&reg_vbat>;
+               en-supply = <&reg_pwr_en>;
+       };
+
+       reg_5V_P: regulator-5V-P {
+               /* Supplies HDMI, USB hub and smartcard */
+               compatible = "regulator-fixed";
+               regulator-name = "5V_P";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               vin-supply = <&reg_vbat>;
+               en-supply = <&reg_pwr_en>;
+       };
+
+       reg_5V_SOM: regulator-5V-SOM {
+               compatible = "regulator-fixed";
+               regulator-name = "5V_SOM";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               vin-supply = <&reg_vbat>;
+               regulator-always-on;
+       };
+
+       reg_22V4_P: regulator-22V4-P {
+               compatible = "regulator-fixed";
+               regulator-name = "22V4_P";
+               regulator-min-microvolt = <22400000>;
+               regulator-max-microvolt = <22400000>;
+               vin-supply = <&reg_vbat>;
+       };
+
+       reg_pwr_en: regulator-pwr-en {
+               compatible = "regulator-fixed";
+               regulator-name = "PWR_EN";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               regulator-always-on;
+       };
+
+       reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+               compatible = "regulator-fixed";
+               regulator-name = "VSD_3V3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               regulator-always-on;
+       };
+
+       reg_vbat: regulator-vbat {
+               compatible = "regulator-fixed";
+               regulator-name = "VBAT_REG";
+               regulator-always-on;
+       };
+
+       wifi_pwr_en: wifi-en {
+               compatible = "regulator-fixed";
+               regulator-name = "WIFI_EN";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               regulator-always-on;
+       };
+};
+
+
+&clk {
+       assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
+       assigned-clock-rates = <786432000>, <722534400>;
+};
+
+&fec1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_fec1>;
+       phy-mode = "rgmii-id";
+       phy-handle = <&ethphy0>;
+       fsl,magic-packet;
+       status = "okay";
+       phy-supply = <&reg_3V3_P>;
+
+       mdio {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               ethphy0: ethernet-phy@1 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       reg = <1>;
+               };
+       };
+};
+
+&i2c1 {
+       clock-frequency = <400000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c1>;
+       status = "okay";
+
+       pmic: pmic@4b {
+               reg = <0x4b>;
+               compatible = "rohm,bd71837";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_pmic>;
+               clocks = <&pmic_osc>;
+               clock-names = "osc";
+               clock-output-names = "pmic_clk";
+               interrupt-parent = <&gpio1>;
+               interrupts = <3 GPIO_ACTIVE_LOW>;
+               interrupt-names = "irq";
+               rohm,reset-snvs-powered;
+
+               regulators {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       buck1_reg: BUCK1@0 {
+                               reg = <0>;
+                               regulator-name = "buck1";
+                               regulator-min-microvolt = <700000>;
+                               regulator-max-microvolt = <1300000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                               regulator-ramp-delay = <1250>;
+                               rohm,dvs-run-voltage = <900000>;
+                               rohm,dvs-idle-voltage = <850000>;
+                               rohm,dvs-suspend-voltage = <800000>;
+                       };
+
+                       buck2_reg: BUCK2@1 {
+                               reg = <1>;
+                               regulator-name = "buck2";
+                               regulator-min-microvolt = <700000>;
+                               regulator-max-microvolt = <1300000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                               regulator-ramp-delay = <1250>;
+                               rohm,dvs-run-voltage = <1000000>;
+                               rohm,dvs-idle-voltage = <900000>;
+                       };
+
+                       buck3_reg: BUCK3@2 {
+                               reg = <2>;
+                               regulator-name = "buck3";
+                               regulator-min-microvolt = <700000>;
+                               regulator-max-microvolt = <1300000>;
+                               rohm,dvs-run-voltage = <1000000>;
+                       };
+
+                       buck4_reg: BUCK4@3 {
+                               reg = <3>;
+                               regulator-name = "buck4";
+                               regulator-min-microvolt = <700000>;
+                               regulator-max-microvolt = <1300000>;
+                               rohm,dvs-run-voltage = <1000000>;
+                       };
+
+                       buck5_reg: BUCK5@4 {
+                               reg = <4>;
+                               regulator-name = "buck5";
+                               regulator-min-microvolt = <700000>;
+                               regulator-max-microvolt = <1350000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       buck6_reg: BUCK6@5 {
+                               reg = <5>;
+                               regulator-name = "buck6";
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       buck7_reg: BUCK7@6 {
+                               reg = <6>;
+                               regulator-name = "buck7";
+                               regulator-min-microvolt = <1605000>;
+                               regulator-max-microvolt = <1995000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       buck8_reg: BUCK8@7 {
+                               reg = <7>;
+                               regulator-name = "buck8";
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1400000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo1_reg: LDO1@8 {
+                               reg = <8>;
+                               regulator-name = "ldo1";
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo2_reg: LDO2@9 {
+                               reg = <9>;
+                               regulator-name = "ldo2";
+                               regulator-min-microvolt = <900000>;
+                               regulator-max-microvolt = <900000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo3_reg: LDO3@10 {
+                               reg = <10>;
+                               regulator-name = "ldo3";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo4_reg: LDO4@11 {
+                               reg = <11>;
+                               regulator-name = "ldo4";
+                               regulator-min-microvolt = <900000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo5_reg: LDO5@12 {
+                               reg = <12>;
+                               regulator-name = "ldo5";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       ldo6_reg: LDO6@13 {
+                               reg = <13>;
+                               regulator-name = "ldo6";
+                               regulator-min-microvolt = <900000>;
+                               regulator-max-microvolt = <1800000>;
+                       };
+
+                       ldo7_reg: LDO7@14 {
+                               reg = <14>;
+                               regulator-name = "ldo7";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+               };
+       };
+
+       typec_ptn5100: usb_typec@52 {
+               compatible = "nxp,ptn5110";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_typec>;
+               reg = <0x52>;
+               interrupt-parent = <&gpio3>;
+               interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+               vconn-supply = <&reg_5V_P>;
+               usb_con: connector {
+                       compatible = "usb-c-connector";
+                       label = "USB-C";
+                       data-role = "dual";
+                       power-role = "dual";
+                       try-power-role = "sink";
+                       source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM 
| PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP )>;
+                       sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM | 
PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP )
+                            PDO_VAR(5000, 12000, 2000)>;
+                       op-sink-microwatt = <10000000>;
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               port@0 {
+                                       reg = <0>;
+                                       usb_con_hs: endpoint {
+                                               remote-endpoint = <&typec_hs>;
+                                       };
+                               };
+                               port@1 {
+                                       reg = <1>;
+                                       usb_con_ss: endpoint {
+                                               remote-endpoint = <&typec_ss>;
+                                       };
+                               };
+                       };
+               };
+
+       };
+
+       rtc@68 {
+               pinctrl-names = "default";
+               compatible = "microcrystal,rv4162";
+               reg = <0x68>;
+               pinctrl-0 = <&pinctrl_rtc>;
+               interrupt-parent = <&gpio4>;
+               interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+       };
+
+       charger: charger@6b { /* bq25896 */
+               compatible = "ti,bq25890";
+               reg = <0x6b>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_charger>;
+               interrupt-parent = <&gpio3>;
+               interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+               ti,battery-regulation-voltage = <4192000>; /* 4.192V */
+               ti,charge-current = <1600000>; /* 1.6 A */
+               ti,termination-current = <66000>;  /* 66mA */
+               ti,precharge-current = <1300000>; /* 1.3A */
+               ti,minimum-sys-voltage = <2750000>; /* 2.75V */
+               ti,boost-voltage = <5000000>; /* 5V */
+               ti,boost-max-current = <50000>; /* 50mA */
+       };
+};
+
+&i2c3 {
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c3>, <&pinctrl_imu>;
+       status = "okay";
+
+       lsm9d_magn: magnetometer@1e     {
+               compatible = "st,lsm9ds1-magn";
+               reg = <0x1e>;
+               interrupt-parent = <&gpio3>;
+               interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+               vdd-supply = <&reg_3V3_P>;
+               vddio-supply = <&reg_3V3_P>;
+       };
+
+       goodix_ts: touchscreen@5d {
+               compatible = "goodix,gt5688";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_goodix_ts>;
+               reg = <0x5d>;
+               interrupt-parent = <&gpio3>;
+               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+               reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+               irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+               touchscreen-size-x = <720>;
+               touchscreen-size-y = <1440>;
+               AVDD28-supply = <&reg_2V8_P>;
+               VDDIO-supply = <&reg_1V8_P>;
+       };
+};
+
+&iomuxc {
+       pinctrl_bt: btgrp {
+               fsl,pins = <
+               /* nBT_DISABLE */
+               MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11             0x16
+               /* BT_HOST_WAKE */
+               MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7              0x10
+               >;
+       };
+
+       pinctrl_charger: chargernirq {
+               fsl,pins = <
+               /* CHRG_nINT */
+               MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25       0x80
+               >;
+       };
+
+       pinctrl_fec1: fec1grp {
+               fsl,pins = <
+               MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC         0x3
+               MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO       0x3
+               MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3   0x1f
+               MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2   0x1f
+               MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1   0x1f
+               MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0   0x1f
+               MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3   0x91
+               MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2   0x91
+               MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1   0x91
+               MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0   0x91
+               MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC   0x1f
+               MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC   0x91
+               MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL     0x91
+               MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL     0x1f
+               MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9       0x19
+               MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2      0x1f
+               >;
+       };
+
+       pinctrl_goodix_ts: gt5688 {
+               fsl,pins = <
+               /* TOUCH INT */
+               MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0         0x16
+               /* TOUCH RST */
+               MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5       0x19
+               >;
+       };
+
+       pinctrl_gpio_leds: gpioleds {
+               fsl,pins = <
+               MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13      0x16
+               >;
+       };
+
+       pinctrl_gpio_keys: gpiokeys {
+               fsl,pins = <
+               MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21       0x16
+               MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22        0x16
+               /* HP_DET */
+               MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20        0x180
+               >;
+       };
+
+       pinctrl_haptic: hapticgrp {
+               fsl,pins = <
+               MX8MQ_IOMUXC_SPDIF_RX_PWM2_OUT          0xc6  /* nHAPTIC */
+               >;
+       };
+
+       pinctrl_i2c1: i2c1grp {
+               fsl,pins = <
+               MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL          0x4000001f
+               MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA          0x4000001f
+               >;
+       };
+
+       pinctrl_i2c3: i2c3grp {
+               fsl,pins = <
+               MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL          0x4000001f
+               MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA          0x4000001f
+               >;
+       };
+
+       pinctrl_imu: imugrp {
+               fsl,pins = <
+               /* IMU_INT */
+               MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19       0x8
+               >;
+       };
+
+       pinctrl_pmic: pmicint {
+               fsl,pins = <
+               MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3       0x80
+               >;
+       };
+
+       pinctrl_pwr_en: pwrengrp {
+               fsl,pins = <
+               MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8               0x06
+               >;
+       };
+
+       pinctrl_pwm1: pwm1 {
+               fsl,pins = <
+               MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT        0x6  /* DSI_BL_PWM */
+               >;
+       };
+
+       pinctrl_rtc: rtcirq {
+               fsl,pins = <
+               MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29        0x80
+               >;
+       };
+
+       pinctrl_typec: typecgrp {
+               fsl,pins = <
+               MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12     0x16
+               MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1       0x80
+               >;
+       };
+
+       pinctrl_uart1: uart1grp {
+               fsl,pins = <
+               MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX             0x49
+               MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX             0x49
+               >;
+       };
+
+       pinctrl_uart2: uart2grp {
+               fsl,pins = <
+               MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX             0x49
+               MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX             0x49
+               MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B          0x49
+               MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B          0x49
+               >;
+       };
+
+       pinctrl_uart3: uart3grp {
+               fsl,pins = <
+               MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX             0x49
+               MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX             0x49
+               >;
+       };
+
+       pinctrl_uart4: uart4grp {
+               fsl,pins = <
+               MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX           0x49
+               MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX           0x49
+               MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B        0x49
+               MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B         0x49
+               MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K      0x49
+               >;
+       };
+
+       pinctrl_usdhc1: usdhc1grp {
+               fsl,pins = <
+               MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x83
+               MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xc3
+               MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xc3
+               MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xc3
+               MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xc3
+               MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xc3
+               MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xc3
+               MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xc3
+               MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xc3
+               MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xc3
+               MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x83
+               MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
+               >;
+       };
+
+       pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+               fsl,pins = <
+               MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x8d
+               MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xcd
+               MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xcd
+               MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xcd
+               MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xcd
+               MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xcd
+               MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xcd
+               MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xcd
+               MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xcd
+               MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xcd
+               MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x8d
+               MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
+               >;
+       };
+
+       pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+               fsl,pins = <
+               MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                 0x9f
+               MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                 0xdf
+               MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0             0xdf
+               MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1             0xdf
+               MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2             0xdf
+               MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3             0xdf
+               MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4             0xdf
+               MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5             0xdf
+               MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6             0xdf
+               MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7             0xdf
+               MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE           0x9f
+               MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B         0xc1
+               >;
+       };
+
+       pinctrl_usdhc2_gpio: usdhc2grpgpio {
+               fsl,pins = <
+               MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19             0x41
+               /* WIFI_WAKE */
+               MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20                  0x80
+               >;
+       };
+
+       pinctrl_usdhc2: usdhc2grp {
+               fsl,pins = <
+               MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK                 0x83
+               MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD                 0xc3
+               MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0             0xc3
+               MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1             0xc3
+               MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2             0xc3
+               MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3             0xc3
+               >;
+       };
+
+       pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+               fsl,pins = <
+               MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK                 0x8d
+               MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD                 0xcd
+               MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0             0xcd
+               MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1             0xcd
+               MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2             0xcd
+               MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3             0xcd
+               >;
+       };
+
+       pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+               fsl,pins = <
+               MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK                 0x9f
+               MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD                 0xcf
+               MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0             0xcf
+               MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1             0xcf
+               MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2             0xcf
+               MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3             0xcf
+               >;
+       };
+
+       pinctrl_wdog: wdoggrp {
+               fsl,pins = <
+               MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B    0xc6
+               >;
+       };
+
+       pinctrl_wwan: wwangrp {
+               fsl,pins = <
+               /* nWWAN_DISABLE */
+               MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4       0x09
+               /* nWoWWAN */
+               MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8      0x80
+               /* WWAN_RESET */
+               MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9      0x19
+               >;
+       };
+
+};
+
+&pwm1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm1>;
+       status = "okay";
+};
+
+&pwm2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_haptic>;
+       status = "okay";
+};
+
+&uart1 { /* console */
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       status = "okay";
+};
+
+&uart3 { /* GNSS */
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart3>;
+       status = "okay";
+};
+
+&uart4 { /* BT */
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_bt>;
+       uart-has-rtscts;
+       status = "okay";
+};
+
+&usb3_phy0 {
+       status = "okay";
+       #address-cells = <1>;
+       #size-cells = <0>;
+       port@0 {
+               reg = <0>;
+               typec_hs: endpoint {
+                       remote-endpoint = <&usb_con_hs>;
+               };
+       };
+       port@1 {
+               reg = <1>;
+               typec_ss: endpoint {
+                       remote-endpoint = <&usb_con_ss>;
+               };
+       };
+};
+
+&usb3_phy1 {
+       status = "okay";
+       #address-cells = <1>;
+       #size-cells = <0>;
+};
+
+&usb_dwc3_0 {
+       status = "okay";
+       extcon = <&typec_ptn5100>;
+       dr_mode = "otg";
+};
+
+&usb_dwc3_1 {
+       status = "okay";
+       dr_mode = "host";
+};
+
+&usdhc1 {
+       pinctrl-names = "default", "state_100mhz", "state_200mhz";
+       pinctrl-0 = <&pinctrl_usdhc1>;
+       pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+       pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+       bus-width = <8>;
+       non-removable;
+       status = "okay";
+};
+
+&usdhc2 {
+       pinctrl-names = "default", "state_100mhz", "state_200mhz";
+       pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+       pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+       pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+       bus-width = <4>;
+       vmmc-supply = <&reg_usdhc2_vmmc>;
+       power-supply = <&wifi_pwr_en>;
+
+       non-removable;
+       disable-wp;
+       cap-sdio-irq;
+       keep-power-in-suspend;
+       wakeup-source;
+       status = "okay";
+};
+
+&wdog1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_wdog>;
+       fsl,ext-reset-output;
+       status = "okay";
+};
-- 
2.17.1

Reply via email to