On Mon, Apr 15, 2019 at 05:03:50PM +0100, Suzuki K Poulose wrote:
> In preparation to use a consistent device naming scheme,
> clean up the device link tracking in replicator driver.
> Use the "coresight" device instead of the "real" parent device
> for all internal purposes. All other requests (e.g, power management,
> DMA operations) must use the "real" device which is the parent device.
> 
> Cc: Mathieu Poirier <mathieu.poir...@linaro.org>
> Signed-off-by: Suzuki K Poulose <suzuki.poul...@arm.com>
> ---
>  drivers/hwtracing/coresight/coresight-replicator.c | 7 ++-----
>  1 file changed, 2 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/hwtracing/coresight/coresight-replicator.c 
> b/drivers/hwtracing/coresight/coresight-replicator.c
> index 4e0da85..8bbb008 100644
> --- a/drivers/hwtracing/coresight/coresight-replicator.c
> +++ b/drivers/hwtracing/coresight/coresight-replicator.c
> @@ -26,13 +26,11 @@
>   * struct replicator_drvdata - specifics associated to a replicator component
>   * @base:    memory mapped base address for this component. Also indicates
>   *           whether this one is programmable or not.
> - * @dev:     the device entity associated with this component
>   * @atclk:   optional clock for the core parts of the replicator.
>   * @csdev:   component vitals needed by the framework
>   */
>  struct replicator_drvdata {
>       void __iomem            *base;
> -     struct device           *dev;
>       struct clk              *atclk;
>       struct coresight_device *csdev;
>  };
> @@ -100,7 +98,7 @@ static int replicator_enable(struct coresight_device 
> *csdev, int inport,
>       if (drvdata->base)
>               rc = dynamic_replicator_enable(drvdata, inport, outport);
>       if (!rc)
> -             dev_dbg(drvdata->dev, "REPLICATOR enabled\n");
> +             dev_dbg(&csdev->dev, "REPLICATOR enabled\n");
>       return rc;
>  }
>  
> @@ -139,7 +137,7 @@ static void replicator_disable(struct coresight_device 
> *csdev, int inport,
>  
>       if (drvdata->base)
>               dynamic_replicator_disable(drvdata, inport, outport);
> -     dev_dbg(drvdata->dev, "REPLICATOR disabled\n");
> +     dev_dbg(&csdev->dev, "REPLICATOR disabled\n");
>  }
>  
>  static const struct coresight_ops_link replicator_link_ops = {
> @@ -193,7 +191,6 @@ static int replicator_probe(struct device *dev, struct 
> resource *res)
>       if (!drvdata)
>               return -ENOMEM;
>  
> -     drvdata->dev = dev;
>       drvdata->atclk = devm_clk_get(dev, "atclk"); /* optional */
>       if (!IS_ERR(drvdata->atclk)) {
>               ret = clk_prepare_enable(drvdata->atclk);

Reviewed-by: Mathieu Poirier <mathieu.poir...@linaro.org>

> -- 
> 2.7.4
> 

Reply via email to