Add support for is25wp256d device from ISSI, present on HiFive
Unleashed dev board (Rev: A00).
Enable quad mode for ISSI device in flash parameters
table.
Signed-off-by: Wesley W. Terpstra <wes...@sifive.com>
Signed-off-by: Palmer Dabbelt <pal...@sifive.com>
Signed-off-by: Sagar Shrikant Kadam <sagar.ka...@sifive.com>
---
drivers/mtd/spi-nor/spi-nor.c | 8 ++++++++
include/linux/mtd/spi-nor.h | 1 +
2 files changed, 9 insertions(+)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index fae1474..cec26a9 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1834,6 +1834,10 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor)
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "is25wp128", INFO(0x9d7018, 0, 64 * 1024, 256,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25wp256d", INFO(0x9d7019, 0, 64 * 1024, 1024,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES)
+ },
/* Macronix */
{ "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1, SECT_4K) },
@@ -3650,6 +3654,10 @@ static int spi_nor_init_params(struct spi_nor *nor,
case SNOR_MFR_MACRONIX:
params->quad_enable = macronix_quad_enable;
break;
+ case SNOR_MFR_ISSI:
+ params->quad_enable = macronix_quad_enable;
+ break;
+
case SNOR_MFR_ST:
case SNOR_MFR_MICRON:
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index b3d360b..ff13297 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -19,6 +19,7 @@
#define SNOR_MFR_ATMEL CFI_MFR_ATMEL
#define SNOR_MFR_GIGADEVICE 0xc8
#define SNOR_MFR_INTEL CFI_MFR_INTEL
+#define SNOR_MFR_ISSI 0x9d /* ISSI */
#define SNOR_MFR_ST CFI_MFR_ST /* ST Micro */
#define SNOR_MFR_MICRON CFI_MFR_MICRON /* Micron */
#define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX
--
1.9.1
