Hi Daniel,
On 19-04-22 19:36, Daniel Baluta wrote:
> i.MX8MM has one wm8524 audio codec connected with
> SAI3 digital audio interface.
>
> This patch uses simple-card machine driver in order
> to enable wm8524 codec.
>
> We need to set:
> * SAI3 pinctrl configuration
> * clock hierarchy
> * codec node
> * simple-card configuration
>
> Signed-off-by: Daniel Baluta <daniel.bal...@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 48 ++++++++++++++++++++
> 1 file changed, 48 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> index 2d5d89475b76..207b13266a96 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> @@ -37,6 +37,35 @@
> gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> enable-active-high;
> };
> +
> + wm8524: audio-codec {
> + #sound-dai-cells = <0>;
> + compatible = "wlf,wm8524";
> + wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
I would mux the gpio where I use them.
> + };
> +
> + sound-wm8524 {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "wm8524-audio";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,frame-master = <&cpudai>;
> + simple-audio-card,bitclock-master = <&cpudai>;
> + simple-audio-card,widgets =
> + "Line", "Left Line Out Jack",
> + "Line", "Right Line Out Jack";
> + simple-audio-card,routing =
> + "Left Line Out Jack", "LINEVOUTL",
> + "Right Line Out Jack", "LINEVOUTR";
> +
> + cpudai: simple-audio-card,cpu {
> + sound-dai = <&sai3>;
> + };
> +
> + link_codec: simple-audio-card,codec {
Can you drop that phandle?
Regards,
Marco
> + sound-dai = <&wm8524>;
> + clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
> + };
> + };
> };
>
> &fec1 {
> @@ -61,6 +90,15 @@
> };
> };
>
> +&sai3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sai3>;
> + assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
> + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
> + assigned-clock-rates = <24576000>;
> + status = "okay";
> +};
> +
> &uart2 { /* console */
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_uart2>;
> @@ -130,6 +168,16 @@
> >;
> };
>
> + pinctrl_sai3: sai3grp {
> + fsl,pins = <
> + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
> + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
> + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
> + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
> + MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6
> + >;
> + };
> +
> pinctrl_uart2: uart2grp {
> fsl,pins = <
> MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
> --
> 2.17.1
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
