tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master head: 7142eaa58b49d9de492ccc16d48df7c488a5fbb6 commit: 62129a0849d27cc94ced832bcf9dcde283dcbe08 iio: chemical: sps30: allow changing self cleaning period date: 3 months ago reproduce: # apt-get install sparse git checkout 62129a0849d27cc94ced832bcf9dcde283dcbe08 make ARCH=x86_64 allmodconfig make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__'
If you fix the issue, kindly add following tag Reported-by: kbuild test robot <[email protected]> sparse warnings: (new ones prefixed by >>) >> drivers/iio/chemical/sps30.c:122:30: sparse: sparse: cast truncates bits >> from constant value (8004 becomes 4) vim +122 drivers/iio/chemical/sps30.c 91 92 static int sps30_do_cmd(struct sps30_state *state, u16 cmd, u8 *data, int size) 93 { 94 /* 95 * Internally sensor stores measurements in a following manner: 96 * 97 * PM1: upper two bytes, crc8, lower two bytes, crc8 98 * PM2P5: upper two bytes, crc8, lower two bytes, crc8 99 * PM4: upper two bytes, crc8, lower two bytes, crc8 100 * PM10: upper two bytes, crc8, lower two bytes, crc8 101 * 102 * What follows next are number concentration measurements and 103 * typical particle size measurement which we omit. 104 */ 105 u8 buf[SPS30_MAX_READ_SIZE] = { cmd >> 8, cmd }; 106 int i, ret = 0; 107 108 switch (cmd) { 109 case SPS30_START_MEAS: 110 buf[2] = 0x03; 111 buf[3] = 0x00; 112 buf[4] = crc8(sps30_crc8_table, &buf[2], 2, CRC8_INIT_VALUE); 113 ret = sps30_write_then_read(state, buf, 5, NULL, 0); 114 break; 115 case SPS30_STOP_MEAS: 116 case SPS30_RESET: 117 case SPS30_START_FAN_CLEANING: 118 ret = sps30_write_then_read(state, buf, 2, NULL, 0); 119 break; 120 case SPS30_READ_AUTO_CLEANING_PERIOD: 121 buf[0] = SPS30_AUTO_CLEANING_PERIOD >> 8; > 122 buf[1] = (u8)SPS30_AUTO_CLEANING_PERIOD; 123 case SPS30_READ_DATA_READY_FLAG: 124 case SPS30_READ_DATA: 125 case SPS30_READ_SERIAL: 126 /* every two data bytes are checksummed */ 127 size += size / 2; 128 ret = sps30_write_then_read(state, buf, 2, buf, size); 129 break; 130 case SPS30_AUTO_CLEANING_PERIOD: 131 buf[2] = data[0]; 132 buf[3] = data[1]; 133 buf[4] = crc8(sps30_crc8_table, &buf[2], 2, CRC8_INIT_VALUE); 134 buf[5] = data[2]; 135 buf[6] = data[3]; 136 buf[7] = crc8(sps30_crc8_table, &buf[5], 2, CRC8_INIT_VALUE); 137 ret = sps30_write_then_read(state, buf, 8, NULL, 0); 138 break; 139 } 140 141 if (ret) 142 return ret; 143 144 /* validate received data and strip off crc bytes */ 145 for (i = 0; i < size; i += 3) { 146 u8 crc = crc8(sps30_crc8_table, &buf[i], 2, CRC8_INIT_VALUE); 147 148 if (crc != buf[i + 2]) { 149 dev_err(&state->client->dev, 150 "data integrity check failed\n"); 151 return -EIO; 152 } 153 154 *data++ = buf[i]; 155 *data++ = buf[i + 1]; 156 } 157 158 return 0; 159 } 160 --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation
