This converts the plain text documentation to reStructuredText format and
add it to Sphinx TOC tree. No essential content change.

Signed-off-by: Changbin Du <changbin...@gmail.com>
---
 ...ory-encryption.txt => amd-memory-encryption.rst} | 13 ++++++++++---
 Documentation/x86/index.rst                         |  1 +
 2 files changed, 11 insertions(+), 3 deletions(-)
 rename Documentation/x86/{amd-memory-encryption.txt => 
amd-memory-encryption.rst} (94%)

diff --git a/Documentation/x86/amd-memory-encryption.txt 
b/Documentation/x86/amd-memory-encryption.rst
similarity index 94%
rename from Documentation/x86/amd-memory-encryption.txt
rename to Documentation/x86/amd-memory-encryption.rst
index afc41f544dab..c48d452d0718 100644
--- a/Documentation/x86/amd-memory-encryption.txt
+++ b/Documentation/x86/amd-memory-encryption.rst
@@ -1,3 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+AMD Memory Encryption
+=====================
+
 Secure Memory Encryption (SME) and Secure Encrypted Virtualization (SEV) are
 features found on AMD processors.
 
@@ -34,7 +40,7 @@ is operating in 64-bit or 32-bit PAE mode, in all other modes 
the SEV hardware
 forces the memory encryption bit to 1.
 
 Support for SME and SEV can be determined through the CPUID instruction. The
-CPUID function 0x8000001f reports information related to SME:
+CPUID function 0x8000001f reports information related to SME::
 
        0x8000001f[eax]:
                Bit[0] indicates support for SME
@@ -48,14 +54,14 @@ CPUID function 0x8000001f reports information related to 
SME:
                           addresses)
 
 If support for SME is present, MSR 0xc00100010 (MSR_K8_SYSCFG) can be used to
-determine if SME is enabled and/or to enable memory encryption:
+determine if SME is enabled and/or to enable memory encryption::
 
        0xc0010010:
                Bit[23]   0 = memory encryption features are disabled
                          1 = memory encryption features are enabled
 
 If SEV is supported, MSR 0xc0010131 (MSR_AMD64_SEV) can be used to determine if
-SEV is active:
+SEV is active::
 
        0xc0010131:
                Bit[0]    0 = memory encryption is not active
@@ -68,6 +74,7 @@ requirements for the system.  If this bit is not set upon 
Linux startup then
 Linux itself will not set it and memory encryption will not be possible.
 
 The state of SME in the Linux kernel can be documented as follows:
+
        - Supported:
          The CPU supports SME (determined through CPUID instruction).
 
diff --git a/Documentation/x86/index.rst b/Documentation/x86/index.rst
index 20091d3e5d97..a0426ab156bd 100644
--- a/Documentation/x86/index.rst
+++ b/Documentation/x86/index.rst
@@ -20,3 +20,4 @@ Linux x86 Support
    pat
    protection-keys
    intel_mpx
+   amd-memory-encryption
-- 
2.20.1

Reply via email to