On Mon, Aug 13, 2007 at 06:30:00PM +0800, Fengguang Wu wrote:
> > On Sun, Aug 12, 2007 at 05:11:23PM +0800, Fengguang Wu wrote:
> > > Miklos Szeredi <[EMAIL PROTECTED]> and me identified a writeback bug:
> > > Basicly they are
> > > - during the dd: ~16M
> > > - after 30s: ~4M
> > > - after 5s: ~4M
> > > - after 5s: ~176M
> > >
> > > The box has 2G memory.
> > >
> > > Question 1:
> > > How come the 5s delays? I run 4 tests in total, 2 of which have such 5s
> > > delays.
> >
> > pdflush runs every five seconds, so that is indicative of the inode being
> > written once for 1024 pages, and then delayed to the next pdflush run 5s
> > later.
> > perhaps the inodes aren't moving between the lists exactly the way you
> > think they are...
>
> Now I figured out the exact situation. When the scan of s_io finishes
> with some small inodes, nr_to_write will be positive, fooling kupdate
> to quit prematurely. But in fact the big dirty file is on s_more_io
> waiting for more io... The attached patch fixes it.
>
> Fengguang
> ===
>
> Subject: writeback: introduce writeback_control.more_io to indicate more io
>
> After making dirty a 100M file, the normal behavior is to
> start the writeback for all data after 30s delays. But
> sometimes the following happens instead:
>
> - after 30s: ~4M
> - after 5s: ~4M
> - after 5s: all remaining 92M
>
> Some analyze shows that the internal io dispatch queues goes like this:
>
> s_io s_more_io
> -------------------------
> 1) 100M,1K 0
> 2) 1K 96M
> 3) 0 96M
>
> 1) initial state with a 100M file and a 1K file
> 2) 4M written, nr_to_write <= 0, so write more
> 3) 1K written, nr_to_write > 0, no more writes(BUG)
>
> nr_to_write > 0 in 3) fools the upper layer to think that data have all been
> written out. Bug the big dirty file is still sitting in s_more_io. We cannot
> simply splice s_more_io back to s_io as soon as s_io becomes empty, and let
> the
> loop in generic_sync_sb_inodes() continue: this may starve newly expired
> inodes
> in s_dirty. It is also not an option to draw inodes from both s_more_io and
> s_dirty, an let the loop go on: this might lead to live locks, and might also
> starve other superblocks in sync time(well kupdate may still starve some
> superblocks, that's another bug).
>
> So we have to return when a full scan of s_io completes. So nr_to_write > 0
> does
> not necessarily mean that "all data are written". This patch introduces a flag
> writeback_control.more_io to indicate this situation. With it the big dirty
> file
> no longer has to wait for the next kupdate invocation 5s later.
Sorry, this patch is found to be dangerous. It locks up my desktop
on heavy I/O: kupdate *immediately* returns to push the file in
s_more_io for writeback, but it *could* still not able to make
progress(locks etc.). Now kupdate ends up *busy looping*. That could
be fixed by wait for somehow 100ms and retry the io. Should we do
it?(or: Is 5s interval considered too long a wait?)
> Signed-off-by: Fengguang Wu <[EMAIL PROTECTED]>
> ---
> fs/fs-writeback.c | 2 ++
> include/linux/writeback.h | 1 +
> mm/page-writeback.c | 9 ++++++---
> 3 files changed, 9 insertions(+), 3 deletions(-)
>
> --- linux-2.6.23-rc2-mm2.orig/fs/fs-writeback.c
> +++ linux-2.6.23-rc2-mm2/fs/fs-writeback.c
> @@ -560,6 +560,8 @@ int generic_sync_sb_inodes(struct super_
> if (wbc->nr_to_write <= 0)
> break;
> }
> + if (!list_empty(&sb->s_more_io))
> + wbc->more_io = 1;
> spin_unlock(&inode_lock);
> return ret; /* Leave any unwritten inodes on s_io */
> }
> --- linux-2.6.23-rc2-mm2.orig/include/linux/writeback.h
> +++ linux-2.6.23-rc2-mm2/include/linux/writeback.h
> @@ -61,6 +61,7 @@ struct writeback_control {
> unsigned for_reclaim:1; /* Invoked from the page allocator */
> unsigned for_writepages:1; /* This is a writepages() call */
> unsigned range_cyclic:1; /* range_start is cyclic */
> + unsigned more_io:1; /* more io to be dispatched */
>
> void *fs_private; /* For use by ->writepages() */
> };
> --- linux-2.6.23-rc2-mm2.orig/mm/page-writeback.c
> +++ linux-2.6.23-rc2-mm2/mm/page-writeback.c
> @@ -382,6 +382,7 @@ static void background_writeout(unsigned
> global_page_state(NR_UNSTABLE_NFS) < background_thresh
> && min_pages <= 0)
> break;
> + wbc.more_io = 0;
> wbc.encountered_congestion = 0;
> wbc.nr_to_write = MAX_WRITEBACK_PAGES;
> wbc.pages_skipped = 0;
> @@ -389,8 +390,9 @@ static void background_writeout(unsigned
> min_pages -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
> if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
> /* Wrote less than expected */
> - congestion_wait(WRITE, HZ/10);
> - if (!wbc.encountered_congestion)
> + if (wbc.encountered_congestion)
> + congestion_wait(WRITE, HZ/10);
> + else if (!wbc.more_io)
> break;
> }
> }
> @@ -455,13 +457,14 @@ static void wb_kupdate(unsigned long arg
> global_page_state(NR_UNSTABLE_NFS) +
> (inodes_stat.nr_inodes - inodes_stat.nr_unused);
> while (nr_to_write > 0) {
> + wbc.more_io = 0;
> wbc.encountered_congestion = 0;
> wbc.nr_to_write = MAX_WRITEBACK_PAGES;
> writeback_inodes(&wbc);
> if (wbc.nr_to_write > 0) {
> if (wbc.encountered_congestion)
> congestion_wait(WRITE, HZ/10);
> - else
> + else if (!wbc.more_io)
> break; /* All the old data is written */
> }
> nr_to_write -= MAX_WRITEBACK_PAGES - wbc.nr_to_write;
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
