Add reset controller support for Bitmain BM1880 SoC reusing the reset-simple driver. While we are at it, this driver has also been modified to make use of the SPDX license identifier.
Signed-off-by: Manivannan Sadhasivam <[email protected]> --- drivers/reset/Kconfig | 3 ++- drivers/reset/Makefile | 1 + drivers/reset/reset-simple.c | 16 +++++++++++----- 3 files changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 2c8c23db92fb..b25e8d139f0d 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -117,7 +117,7 @@ config RESET_QCOM_PDC config RESET_SIMPLE bool "Simple Reset Controller Driver" if COMPILE_TEST - default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED + default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN help This enables a simple reset controller driver for reset lines that that can be asserted and deasserted by toggling bits in a contiguous, @@ -129,6 +129,7 @@ config RESET_SIMPLE - RCC reset controller in STM32 MCUs - Allwinner SoCs - ZTE's zx2967 family + - Bitmain BM1880 SoC config RESET_STM32MP157 bool "STM32MP157 Reset Driver" if COMPILE_TEST diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 61456b8f659c..b87968771166 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o obj-$(CONFIG_RESET_ATH79) += reset-ath79.o obj-$(CONFIG_RESET_AXS10X) += reset-axs10x.o obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o +#obj-$(CONFIG_RESET_BM1880) += reset-bm1880.o obj-$(CONFIG_RESET_BRCMSTB) += reset-brcmstb.o obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o obj-$(CONFIG_RESET_IMX7) += reset-imx7.o diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c index 77fbba3100c8..fd1fa4984d76 100644 --- a/drivers/reset/reset-simple.c +++ b/drivers/reset/reset-simple.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Simple Reset Controller Driver * @@ -8,11 +9,6 @@ * Copyright 2013 Maxime Ripard * * Maxime Ripard <[email protected]> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #include <linux/device.h> @@ -119,6 +115,14 @@ static const struct reset_simple_devdata reset_simple_active_low = { .status_active_low = true, }; +#define BM1880_NR_BANKS 2 + +static const struct reset_simple_devdata reset_simple_bm1880 = { + .nr_resets = BM1880_NR_BANKS * 32, + .active_low = true, + .status_active_low = true, +}; + static const struct of_device_id reset_simple_dt_ids[] = { { .compatible = "altr,stratix10-rst-mgr", .data = &reset_simple_socfpga }, @@ -129,6 +133,8 @@ static const struct of_device_id reset_simple_dt_ids[] = { .data = &reset_simple_active_low }, { .compatible = "aspeed,ast2400-lpc-reset" }, { .compatible = "aspeed,ast2500-lpc-reset" }, + { .compatible = "bitmain,bm1880-reset", + .data = &reset_simple_bm1880 }, { /* sentinel */ }, }; -- 2.17.1
