3.16.66-rc1 review patch. If anyone has any objections, please let me know.
------------------ From: Linus Walleij <[email protected]> commit b5f034845e70916fd33e172fad5ad530a29c10ab upstream. These two lines are active high, not active low. The bug was found when we changed the kernel to respect the polarity defined in the device tree. Fixes: 1b90e06b1429 ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan") Cc: Jamie Lentin <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Jason Cooper <[email protected]> Cc: Andrew Lunn <[email protected]> Cc: Gregory Clement <[email protected]> Cc: Sebastian Hesselbarth <[email protected]> Cc: Julien D'Ascenzio <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Tested-by: Jamie Lentin <[email protected]> Reported-by: Julien D'Ascenzio <[email protected]> Tested-by: Julien D'Ascenzio <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]> Signed-off-by: Ben Hutchings <[email protected]> --- arch/arm/boot/dts/kirkwood-dnskw.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -35,8 +35,8 @@ compatible = "gpio-fan"; pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>; pinctrl-names = "default"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW - &gpio1 13 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH + &gpio1 13 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0 3000 1 6000 2>;
