Just use rdev->desc instead.

Signed-off-by: Axel Lin <axel....@ingics.com>
---
 drivers/regulator/stm32-pwr.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/stm32-pwr.c b/drivers/regulator/stm32-pwr.c
index 7b39a41530d4..8bd15e4d2cea 100644
--- a/drivers/regulator/stm32-pwr.c
+++ b/drivers/regulator/stm32-pwr.c
@@ -40,7 +40,6 @@ static u32 ready_mask_table[STM32PWR_REG_NUM_REGS] = {
 
 struct stm32_pwr_reg {
        void __iomem *base;
-       const struct regulator_desc *desc;
        u32 ready_mask;
 };
 
@@ -61,7 +60,7 @@ static int stm32_pwr_reg_is_enabled(struct regulator_dev 
*rdev)
 
        val = readl_relaxed(priv->base + REG_PWR_CR3);
 
-       return (val & priv->desc->enable_mask);
+       return (val & rdev->desc->enable_mask);
 }
 
 static int stm32_pwr_reg_enable(struct regulator_dev *rdev)
@@ -71,7 +70,7 @@ static int stm32_pwr_reg_enable(struct regulator_dev *rdev)
        u32 val;
 
        val = readl_relaxed(priv->base + REG_PWR_CR3);
-       val |= priv->desc->enable_mask;
+       val |= rdev->desc->enable_mask;
        writel_relaxed(val, priv->base + REG_PWR_CR3);
 
        /* use an arbitrary timeout of 20ms */
@@ -90,7 +89,7 @@ static int stm32_pwr_reg_disable(struct regulator_dev *rdev)
        u32 val;
 
        val = readl_relaxed(priv->base + REG_PWR_CR3);
-       val &= ~priv->desc->enable_mask;
+       val &= ~rdev->desc->enable_mask;
        writel_relaxed(val, priv->base + REG_PWR_CR3);
 
        /* use an arbitrary timeout of 20ms */
@@ -153,7 +152,6 @@ static int stm32_pwr_regulator_probe(struct platform_device 
*pdev)
                if (!priv)
                        return -ENOMEM;
                priv->base = base;
-               priv->desc = &stm32_pwr_desc[i];
                priv->ready_mask = ready_mask_table[i];
                config.driver_data = priv;
 
-- 
2.17.1

Reply via email to