Add bindings for Microchip UCS1002 Programmable USB Port Power
Controller with Charger Emulation.
Signed-off-by: Andrey Smirnov <andrew.smir...@gmail.com>
Reviewed-by: Rob Herring <robh...@kernel.org>
Cc: Enric Balletbo Serra <enric.balle...@collabora.com>
Cc: Chris Healy <cphe...@gmail.com>
Cc: Lucas Stach <l.st...@pengutronix.de>
Cc: Fabio Estevam <feste...@gmail.com>
Cc: Guenter Roeck <li...@roeck-us.net>
Cc: Sebastian Reichel <s...@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux...@vger.kernel.org
---
.../power/supply/microchip,ucs1002.txt | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644
Documentation/devicetree/bindings/power/supply/microchip,ucs1002.txt
diff --git
a/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.txt
b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.txt
new file mode 100644
index 000000000000..1d284ad816bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.txt
@@ -0,0 +1,27 @@
+Microchip UCS1002 USB Port Power Controller
+
+Required properties:
+- compatible : Should be "microchip,ucs1002";
+- reg : I2C slave address
+
+Optional properties:
+- interrupts : A list of interrupts lines present (could be either
+ corresponding to A_DET# pin, ALERT# pin, or both)
+- interrupt-names : A list of interrupt names. Should contain (if
+ present):
+ - "a_det" for line connected to A_DET# pin
+ - "alert" for line connected to ALERT# pin
+ Both are expected to be IRQ_TYPE_EDGE_BOTH
+Example:
+
+&i2c3 {
+ charger@32 {
+ compatible = "microchip,ucs1002";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ucs1002_pins>;
+ reg = <0x32>;
+ interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
+ <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "a_det", "alert";
+ };
+};
--
2.20.1
