On Fri, Apr 26, 2019 at 05:54:26AM +0000, Ran Wang wrote:
> This patch adds USB dt nodes for LS1028A.
>
> Signed-off-by: Ran Wang <[email protected]>
> ---
> Changes in v2:
> - Rename node from usb3@... to usb@... to meet DTSpec
>
> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 20 ++++++++++++++++++++
> 1 files changed, 20 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 8dd3501..188cfb8 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -144,6 +144,26 @@
> clocks = <&sysclk>;
> };
>
> + usb0:usb@3100000 {
^ space needed
> + compatible= "snps,dwc3";
Needs an SoC specific compatible.
> + reg= <0x0 0x3100000 0x0 0x10000>;
> + interrupts= <0 80 0x4>;
> + dr_mode= "host";
> + snps,dis_rxdet_inp3_quirk;
> + snps,quirk-frame-length-adjustment = <0x20>;
> + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
> + };
> +
> + usb1:usb@3110000 {
> + compatible= "snps,dwc3";
> + reg= <0x0 0x3110000 0x0 0x10000>;
> + interrupts= <0 81 0x4>;
> + dr_mode= "host";
> + snps,dis_rxdet_inp3_quirk;
> + snps,quirk-frame-length-adjustment = <0x20>;
> + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
> + };
> +
> i2c0: i2c@2000000 {
> compatible = "fsl,vf610-i2c";
> #address-cells = <1>;
> --
> 1.7.1
>
