hi Ulf
On 5/3/19 3:29 PM, Ulf Hansson wrote:
On Tue, 30 Apr 2019 at 14:06, Ludovic BARRE <ludovic.ba...@st.com> wrote:
On 4/30/19 1:13 PM, Ulf Hansson wrote:
On Fri, 26 Apr 2019 at 09:46, Ludovic Barre <ludovic.ba...@st.com> wrote:
From: Ludovic Barre <ludovic.ba...@st.com>
This patch series adds busy detect for stm32 sdmmc variant.
Some adaptations are required:
-Avoid to check and poll busy status when is not expected.
-Clear busy status bit if busy_detect_flag and busy_detect_mask are
different.
-Add hardware busy timeout with MMCIDATATIMER register.
V2:
-mmci_cmd_irq cleanup in separate patch.
-simplify the busy_detect_flag exclude
-replace sdmmc specific comment in
"mmc: mmci: avoid fake busy polling in mmci_irq"
to focus on common behavior
Ludovic Barre (5):
mmc: mmci: cleanup mmci_cmd_irq for busy detect feature
mmc: mmci: avoid fake busy polling in mmci_irq
mmc: mmci: fix clear of busy detect status
mmc: mmci: add hardware busy timeout feature
mmc: mmci: add busy detect for stm32 sdmmc variant
drivers/mmc/host/mmci.c | 61
++++++++++++++++++++++++++++++++++++++-----------
drivers/mmc/host/mmci.h | 3 +++
2 files changed, 51 insertions(+), 13 deletions(-)
--
2.7.4
Ludovic, just wanted to let you know that I am reviewing and testing
this series.
However, while running some tests on Ux500 for validating the busy
detection code, even without your series applied, I encounter some odd
behaviors. I am looking into the problem to understand better and will
let you know as soon as I have some more data to share.
Oops, don't hesitate to share your status, if I could help.
Thanks! Good and bad news here, then.
I now understand what is going on - and there is certainly room for
improvements here, but more importantly the actual mmci busy detection
works as expected.
When it comes to improvements, the main issue I have found is how we
treat DATA WRITES. In many cases we simply don't use the HW busy
detection at all, but instead rely on the mmc core to send CMD13 in a
loop to poll. Well, then if the polling would have consisted of a
couple of CMD13s that wouldn't be an issue, but my observations is
rather that the numbers of CMD13 sent to poll is in the range or
hundreds/thousands - per each WRITE request!
I am going to send a patch (or two) that improves the behavior. It
might even involve changing parts in core layer, not sure how the end
result will look like yet.
yes, these will improve the drivers without hardware busy completion.
great
In any case, I have applied patch 1 and patch2 for next, as the tests
turned out well at my side. I also took the liberty of updating some
of the comments/changelogs, please have look and tell if there is
something you want to change.
I will continue with the rest of series next week.
thanks, and good week-end.
Kind regards
Uffe
