On 02. 05. 19 2:48, Rob Herring wrote:
On Fri, Apr 26, 2019 at 10:30:17AM +0200, Michal Vokáč wrote:
Normally, the MPR121 controller uses separate interrupt line to notify
the I2C host that a key was touched/released. To support platforms that
can not use the interrupt line, polling of the MPR121 registers can be
used.
Other than making the 'interrupts' property optional, that's a driver
change, not a DT change. IOW, we shouldn't need a whole new binding.
OK, I will update the existing binding instead.
Thank you,
Michal
Signed-off-by: Michal Vokáč <michal.vo...@ysoft.com>
---
.../bindings/input/mpr121-touchkey-polled.txt | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644
Documentation/devicetree/bindings/input/mpr121-touchkey-polled.txt
diff --git a/Documentation/devicetree/bindings/input/mpr121-touchkey-polled.txt
b/Documentation/devicetree/bindings/input/mpr121-touchkey-polled.txt
new file mode 100644
index 000000000000..6bb1d312614c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mpr121-touchkey-polled.txt
@@ -0,0 +1,26 @@
+* Freescale MPR121 Controller without interrupt line
+
+Required Properties:
+- compatible: Should be "fsl,mpr121-touchkey-polled"
+- reg: The I2C slave address of the device.
+- vdd-supply: Phandle to the Vdd power supply.
+- linux,keycodes: Specifies an array of numeric keycode values to
+ be used for reporting button presses. The array can
+ contain up to 12 entries.
+
+Optional Properties:
+- autorepeat: Enable autorepeat feature.
+
+Example:
+
+#include "dt-bindings/input/input.h"
+
+ touchkeys: keys@5a {
+ compatible = "fsl,mpr121-touchkey-polled";
+ reg = <0x5a>;
+ autorepeat;
+ vdd-supply = <&ldo4_reg>;
+ linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>,
+ <KEY_4> <KEY_5>, <KEY_6>, <KEY_7>,
+ <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>;
+ };
--
2.1.4
