On 5/7/2019 10:58 AM, Akinobu Mita wrote:
Copy telemetry log page definisions from nvme-cli.
Cc: Johannes Berg <johan...@sipsolutions.net>
Cc: Keith Busch <keith.bu...@intel.com>
Cc: Jens Axboe <ax...@fb.com>
Cc: Christoph Hellwig <h...@lst.de>
Cc: Sagi Grimberg <s...@grimberg.me>
Cc: Minwoo Im <minwoo.im....@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.m...@gmail.com>
---
* v2
- New patch in this version.
include/linux/nvme.h | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index c40720c..5217fe4 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -396,6 +396,28 @@ enum {
NVME_NIDT_UUID = 0x03,
};
+/* Derived from 1.3a Figure 101: Get Log Page – Telemetry Host
+ * -Initiated Log (Log Identifier 07h)
+ */
Is this Host Initiated or Controller Initiated? The comment says host
initiated but everything else seems to indicated controller initiated.
Is controller initiated even the correct choice because the controller
would have sent an AER to indicate that the host should pull the
telemetry data.
+struct nvme_telemetry_log_page_hdr {
+ __u8 lpi; /* Log page identifier */
+ __u8 rsvd[4];
+ __u8 iee_oui[3];
+ __le16 dalb1; /* Data area 1 last block */
+ __le16 dalb2; /* Data area 2 last block */
+ __le16 dalb3; /* Data area 3 last block */
+ __u8 rsvd1[368]; /* TODO verify */
+ __u8 ctrlavail; /* Controller initiated data avail?*/
+ __u8 ctrldgn; /* Controller initiated telemetry Data Gen # */
+ __u8 rsnident[128];
+ /* We'll have to double fetch so we can get the header,
+ * parse dalb1->3 determine how much size we need for the
+ * log then alloc below. Or just do a secondary non-struct
+ * allocation.
+ */
+ __u8 telemetry_dataarea[0];
+};
+
struct nvme_smart_log {
__u8 critical_warning;
__u8 temperature[2];
@@ -832,6 +854,7 @@ enum {
NVME_LOG_FW_SLOT = 0x03,
NVME_LOG_CHANGED_NS = 0x04,
NVME_LOG_CMD_EFFECTS = 0x05,
+ NVME_LOG_TELEMETRY_CTRL = 0x08,
NVME_LOG_ANA = 0x0c,
NVME_LOG_DISC = 0x70,
NVME_LOG_RESERVATION = 0x80,
