On Wed, May 08, 2019 at 11:46:35AM -0700, Florian Fainelli wrote:
> If the SCMI firmware implementation is reporting values in a scale that
> is different from the HWMON units, we need to scale up or down the value
> according to how far appart they are.
>
> Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
Question is which tree this series should go through. I am fine with arm.
Thanks,
Guenter
> ---
> drivers/hwmon/scmi-hwmon.c | 45 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c
> index a80183a488c5..2c7b87edf5aa 100644
> --- a/drivers/hwmon/scmi-hwmon.c
> +++ b/drivers/hwmon/scmi-hwmon.c
> @@ -18,6 +18,47 @@ struct scmi_sensors {
> const struct scmi_sensor_info **info[hwmon_max];
> };
>
> +static inline u64 __pow10(u8 x)
> +{
> + u64 r = 1;
> +
> + while (x--)
> + r *= 10;
> +
> + return r;
> +}
> +
> +static int scmi_hwmon_scale(const struct scmi_sensor_info *sensor, u64
> *value)
> +{
> + s8 scale = sensor->scale;
> + u64 f;
> +
> + switch (sensor->type) {
> + case TEMPERATURE_C:
> + case VOLTAGE:
> + case CURRENT:
> + scale += 3;
> + break;
> + case POWER:
> + case ENERGY:
> + scale += 6;
> + break;
> + default:
> + break;
> + }
> +
> + if (abs(scale) > 19)
> + return -E2BIG;
> +
> + f = __pow10(abs(scale));
> + if (scale > 0)
> + *value *= f;
> + else
> + *value = div64_u64(*value, f);
> +
> + return 0;
> +}
> +
> static int scmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
> u32 attr, int channel, long *val)
> {
> @@ -29,6 +70,10 @@ static int scmi_hwmon_read(struct device *dev, enum
> hwmon_sensor_types type,
>
> sensor = *(scmi_sensors->info[type] + channel);
> ret = h->sensor_ops->reading_get(h, sensor->id, false, &value);
> + if (ret)
> + return ret;
> +
> + ret = scmi_hwmon_scale(sensor, &value);
> if (!ret)
> *val = value;
>
> --
> 2.17.1
>
