El Miércoles, 22 de Agosto de 2007 00:08, Rene Herman escribió: > You have a SATA harddrive (Hitachi Travelstar 5K100 100GB SATA/2.5") and an > IDE (also known as PATA) DVD drive (LG GMA-4082N). That is, your disk > should be driven by the: > > "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" > > under the "Serial ATA (prod) and Parallel ATA (experimental) drivers" menu, > and it seems this driver should also take care of your DVD. Not sure from > your report what you are using -- first try with only that driver, and > nothing from the old "ATA/ATAPI/MFM/RLL support" menu selected. > > In that situation, your harddrive works, but your DVD does not?
Okay, now it's tested as you said. In fact, in this way with only the SATA drivers activated and ATA/ATAPI support completely unselected, my HDD works but my DVD not. And so... > If so, this should be fixed in the driver, but to get things working I > believe you may try with both the above driver for your harddisk and the > old IDE driver for the DVD: > > <*> Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support > <*> Include IDE/ATAPI CDROM support (NEW) > [*] PCI IDE chipset support > [*] Generic PCI bus-master DMA support > <*> Intel PIIXn chipsets support Checked. > (do not select IDE/ATA-2 disk support) Unselected. Now, I have this kernel panic: ################### #VFS: cannot open root device "sda3" or unknown-block (0,0) #Please, append a correct "root=" boot option; here are the available #partitions: #1600 4194302 hdc driver: ide-cdrom #Kernel panic - not syncing: VFS: Unable to mount root fs on #unknown-block(0,0) ################### > where you may need to boot with a "libata.atapi_enabled=0" kernel > parameter. This parameter has no effect. I have the same kernel panic with or without it. José Luis Patiño. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
