Normally when the MMC core sees an "-EILSEQ" error returned by a host
controller then it will trigger a retuning of the card. This is
generally a good idea.
However, if a command is expected to sometimes cause transfer errors
then these transfer errors shouldn't cause a re-tuning. This
re-tuning will be a needless waste of time. One example case where a
transfer is expected to cause errors is when transitioning between
sleep and active state on certain Broadcom WiFi cards. Specifically
if the card was already transitioning between states when the command
was sent it could cause an error on the SDIO bus.
Let's add an API that the SDIO card drivers can call that will
temporarily disable the auto-tuning functionality. Then we can add a
call to this in the Broadcom WiFi driver and any other driver that
might have similar needs.
Without this change on rk3288-veyron-minnie I periodically see this in
the logs of a machine just sitting there idle:
dwmmc_rockchip ff0d0000.dwmmc: Successfully tuned phase to XYZ
Fixes: bd11e8bd03ca ("mmc: core: Flag re-tuning is needed on CRC errors")
Signed-off-by: Douglas Anderson <diand...@chromium.org>
---
Note that are are a whole boatload of different ways that we could
provide an API for the Broadcom WiFi SDIO driver. This patch
illustrates one way but if maintainers feel strongly that this is too
ugly and have a better idea then I can give it a shot too. From a
purist point of view I kinda felt that the "expect errors" really
belonged as part of the mmc_request structure, but getting it into
there meant changing a whole pile of core SD/MMC APIs. Simply adding
it to the host seemed to match the current style better and was a less
intrusive change.
drivers/mmc/core/core.c | 27 +++++++++++++++++++++++++--
include/linux/mmc/core.h | 2 ++
include/linux/mmc/host.h | 1 +
3 files changed, 28 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 6db36dc870b5..ba4f71aa8cd9 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -144,8 +144,9 @@ void mmc_request_done(struct mmc_host *host, struct
mmc_request *mrq)
int err = cmd->error;
/* Flag re-tuning needed on CRC errors */
- if ((cmd->opcode != MMC_SEND_TUNING_BLOCK &&
- cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) &&
+ if (cmd->opcode != MMC_SEND_TUNING_BLOCK &&
+ cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200 &&
+ !host->expect_errors &&
(err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) ||
(mrq->data && mrq->data->error == -EILSEQ) ||
(mrq->stop && mrq->stop->error == -EILSEQ)))
@@ -2163,6 +2164,28 @@ int mmc_sw_reset(struct mmc_host *host)
}
EXPORT_SYMBOL(mmc_sw_reset);
+void mmc_expect_errors_begin(struct mmc_host *host)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ WARN_ON(host->expect_errors);
+ host->expect_errors = true;
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+EXPORT_SYMBOL_GPL(mmc_expect_errors_begin);
+
+void mmc_expect_errors_end(struct mmc_host *host)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ WARN_ON(!host->expect_errors);
+ host->expect_errors = false;
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+EXPORT_SYMBOL_GPL(mmc_expect_errors_end);
+
static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
{
host->f_init = freq;
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 134a6483347a..02a13abf0cda 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -178,6 +178,8 @@ int mmc_wait_for_cmd(struct mmc_host *host, struct
mmc_command *cmd,
int mmc_hw_reset(struct mmc_host *host);
int mmc_sw_reset(struct mmc_host *host);
+void mmc_expect_errors_begin(struct mmc_host *host);
+void mmc_expect_errors_end(struct mmc_host *host);
void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card);
#endif /* LINUX_MMC_CORE_H */
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 43d0f0c496f6..8d553fb8c834 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -398,6 +398,7 @@ struct mmc_host {
unsigned int retune_now:1; /* do re-tuning at next req */
unsigned int retune_paused:1; /* re-tuning is temporarily
disabled */
unsigned int use_blk_mq:1; /* use blk-mq */
+ unsigned int expect_errors:1; /* don't trigger retune upon
errors */
int rescan_disable; /* disable card detection */
int rescan_entered; /* used with nonremovable
devices */
--
2.21.0.1020.gf2820cf01a-goog
