Instead of using Qualcomm-specific terminology, use generic node names
for the idle states that are easier to understand. Move the description
into the "idle-state-name" property.
Signed-off-by: Amit Kucheria <amit.kuche...@linaro.org>
Reviewed-by: Niklas Cassel <niklas.cas...@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezc...@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi
b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 82ea5b8b37a2..3a8c6c4fcf15 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -110,7 +110,7 @@
reg = <0x0>;
next-level-cache = <&L2_0>;
enable-method = "psci";
- cpu-idle-states = <&CPU_SPC>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
clocks = <&apcs>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>;
@@ -122,7 +122,7 @@
reg = <0x1>;
next-level-cache = <&L2_0>;
enable-method = "psci";
- cpu-idle-states = <&CPU_SPC>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
clocks = <&apcs>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>;
@@ -134,7 +134,7 @@
reg = <0x2>;
next-level-cache = <&L2_0>;
enable-method = "psci";
- cpu-idle-states = <&CPU_SPC>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
clocks = <&apcs>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>;
@@ -146,7 +146,7 @@
reg = <0x3>;
next-level-cache = <&L2_0>;
enable-method = "psci";
- cpu-idle-states = <&CPU_SPC>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
clocks = <&apcs>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>;
@@ -160,8 +160,9 @@
idle-states {
entry-method = "psci";
- CPU_SPC: spc {
+ CPU_SLEEP_0: cpu-sleep-0 {
compatible = "arm,idle-state";
+ idle-state-name = "standalone-power-collapse";
arm,psci-suspend-param = <0x40000002>;
entry-latency-us = <130>;
exit-latency-us = <150>;
--
2.17.1
