[PATCH 1/3] ARM: dts: imx6: rdu2: Add node for UCS1002 USB charger chip

[Andrey Smirnov]

Add node for UCS1002 USB charger chip connected to front panel USB and
replace "regulator-fixed" previously used to control VBUS.

Signed-off-by: Andrey Smirnov <andrew.smir...@gmail.com>
Cc: Shawn Guo <shawn...@kernel.org>
Cc: Chris Healy <cphe...@gmail.com>
Cc: Fabio Estevam <feste...@gmail.com>
Cc: Lucas Stach <l.st...@pengutronix.de>
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 35 ++++++++++++-------------
 1 file changed, 17 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi 
b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 93be00a60c88..977d923e35df 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -60,18 +60,6 @@
                regulator-always-on;
        };
 
-       reg_5p0v_user_usb: regulator-5p0v-user-usb {
-               compatible = "regulator-fixed";
-               pinctrl-names = "default";
-               pinctrl-0 = <&pinctrl_reg_user_usb>;
-               vin-supply = <&reg_5p0v_main>;
-               regulator-name = "5V_USER_USB";
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-               gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
-               startup-delay-us = <1000>;
-       };
-
        reg_3p3v_pmic: regulator-3p3v-pmic {
                compatible = "regulator-fixed";
                vin-supply = <&reg_12p0v>;
@@ -590,6 +578,16 @@
                status = "disabled";
        };
 
+       reg_5p0v_user_usb: charger@32 {
+               compatible = "microchip,ucs1002";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_ucs1002_pins>;
+               reg = <0x32>;
+               interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
+                                     <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
+               interrupt-names = "a_det", "alert";
+       };
+
        hpa1: amp@60 {
                compatible = "ti,tpa6130a2";
                pinctrl-names = "default";
@@ -982,12 +980,6 @@
                >;
        };
 
-       pinctrl_reg_user_usb: usbotggrp {
-               fsl,pins = <
-                       MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x40000038
-               >;
-       };
-
        pinctrl_rmii_phy_irq: phygrp {
                fsl,pins = <
                        MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x40010000
@@ -1047,6 +1039,13 @@
                >;
        };
 
+       pinctrl_ucs1002_pins: ucs1002grp {
+               fsl,pins = <
+                       MX6QDL_PAD_EIM_A25__GPIO5_IO02          0x1b0b0
+                       MX6QDL_PAD_EIM_D21__GPIO3_IO21          0x1b0b0
+               >;
+       };
+
        pinctrl_usdhc2: usdhc2grp {
                fsl,pins = <
                        MX6QDL_PAD_SD2_CMD__SD2_CMD             0x10059
-- 
2.21.0