On Wed, May 22, 2019 at 02:29:34PM +0530, Sagar Shrikant Kadam wrote:
> The i2c-ocore driver already has a polling mode interface.But it needs
> a workaround for FU540 Chipset on HiFive unleashed board (RevA00).
> There is an erratum in FU540 chip that prevents interrupt driven i2c
> transfers from working, and also the I2C controller's interrupt bit
> cannot be cleared if set, due to this the existing i2c polling mode
> interface added in mainline earlier doesn't work, and CPU stall's
> infinitely, when-ever i2c transfer is initiated.
>
> Ref:
> commit dd7dbf0eb090 ("i2c: ocores: refactor setup for polling")
>
> The workaround / fix under OCORES_FLAG_BROKEN_IRQ is particularly for
> FU540-COOO SoC.
>
> The polling function identifies a SiFive device based on the device node
> and enables the workaround.
>
> Signed-off-by: Sagar Shrikant Kadam <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
