On FU540, the management IP block is tightly coupled with the Cadence MACB IP block. It manages many of the boundary signals from the MACB IP This patchset controls the tx_clk input signal to the MACB IP. It switches between the local TX clock (125MHz) and PHY TX clocks. This is necessary to toggle between 1Gb and 100/10Mb speeds.
Future patches may add support for monitoring or controlling other IP boundary signals. This patchset is mostly based on work done by Wesley Terpstra <[email protected]> This patchset is based on Linux v5.2-rc1 and tested on HiFive Unleashed board with additional board related patches needed for testing can be found at dev/yashs/ethernet branch of: https://github.com/yashshah7/riscv-linux.git Yash Shah (2): net/macb: bindings doc: add sifive fu540-c000 binding net: macb: Add support for SiFive FU540-C000 Documentation/devicetree/bindings/net/macb.txt | 3 + drivers/net/ethernet/cadence/macb_main.c | 118 +++++++++++++++++++++++++ 2 files changed, 121 insertions(+) -- 1.9.1
