From: Angus Ainslie (Purism) <[email protected]> commit 941acd566b1807b291bbdca31cc5158e26ffcf83 upstream.
On imx8mq B0 chip, AHB/SDMA clock ratio 2:1 can't be supported, since SDMA clock ratio has to be increased to 250Mhz, AHB can't reach to 500Mhz, so use 1:1 instead. To limit this change to the imx8mq for now this patch also adds an im8mq-sdma compatible string. Signed-off-by: Angus Ainslie (Purism) <[email protected]> Acked-by: Robin Gong <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Cc: Richard Leitner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/dma/imx-sdma.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -419,6 +419,7 @@ struct sdma_driver_data { int chnenbl0; int num_events; struct sdma_script_start_addrs *script_addrs; + bool check_ratio; }; struct sdma_engine { @@ -557,6 +558,13 @@ static struct sdma_driver_data sdma_imx7 .script_addrs = &sdma_script_imx7d, }; +static struct sdma_driver_data sdma_imx8mq = { + .chnenbl0 = SDMA_CHNENBL0_IMX35, + .num_events = 48, + .script_addrs = &sdma_script_imx7d, + .check_ratio = 1, +}; + static const struct platform_device_id sdma_devtypes[] = { { .name = "imx25-sdma", @@ -580,6 +588,9 @@ static const struct platform_device_id s .name = "imx7d-sdma", .driver_data = (unsigned long)&sdma_imx7d, }, { + .name = "imx8mq-sdma", + .driver_data = (unsigned long)&sdma_imx8mq, + }, { /* sentinel */ } }; @@ -593,6 +604,7 @@ static const struct of_device_id sdma_dt { .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, }, { .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, }, { .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, }, + { .compatible = "fsl,imx8mq-sdma", .data = &sdma_imx8mq, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, sdma_dt_ids); @@ -1852,7 +1864,8 @@ static int sdma_init(struct sdma_engine if (ret) goto disable_clk_ipg; - if (clk_get_rate(sdma->clk_ahb) == clk_get_rate(sdma->clk_ipg)) + if (sdma->drvdata->check_ratio && + (clk_get_rate(sdma->clk_ahb) == clk_get_rate(sdma->clk_ipg))) sdma->clk_ratio = 1; /* Be sure SDMA has not started yet */
