On Thu, Apr 25, 2019 at 04:26:40PM +0800, Yuantian Tang wrote: > The Thermal Monitoring Unit (TMU) monitors and reports the > temperature from 2 remote temperature measurement sites > located on ls1028a chip. > Add TMU dts node to enable this feature. > > Signed-off-by: Yuantian Tang <andy.t...@nxp.com>
I dont see anything wrong from a thermal standpoint.
Acked-by: Eduardo Valentin <edubez...@gmail.com>
Please get this via your arch tree maintainer to avoid merge conflicts.
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 114
> ++++++++++++++++++++++++
> 1 files changed, 114 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index b045812..a25f5fc 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -29,6 +29,7 @@
> clocks = <&clockgen 1 0>;
> next-level-cache = <&l2>;
> cpu-idle-states = <&CPU_PH20>;
> + #cooling-cells = <2>;
> };
>
> cpu1: cpu@1 {
> @@ -39,6 +40,7 @@
> clocks = <&clockgen 1 0>;
> next-level-cache = <&l2>;
> cpu-idle-states = <&CPU_PH20>;
> + #cooling-cells = <2>;
> };
>
> l2: l2-cache {
> @@ -398,6 +400,118 @@
> status = "disabled";
> };
>
> + tmu: tmu@1f00000 {
> + compatible = "fsl,qoriq-tmu";
> + reg = <0x0 0x1f80000 0x0 0x10000>;
> + interrupts = <0 23 0x4>;
> + fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
> + fsl,tmu-calibration = <0x00000000 0x00000024
> + 0x00000001 0x0000002b
> + 0x00000002 0x00000031
> + 0x00000003 0x00000038
> + 0x00000004 0x0000003f
> + 0x00000005 0x00000045
> + 0x00000006 0x0000004c
> + 0x00000007 0x00000053
> + 0x00000008 0x00000059
> + 0x00000009 0x00000060
> + 0x0000000a 0x00000066
> + 0x0000000b 0x0000006d
> +
> + 0x00010000 0x0000001c
> + 0x00010001 0x00000024
> + 0x00010002 0x0000002c
> + 0x00010003 0x00000035
> + 0x00010004 0x0000003d
> + 0x00010005 0x00000045
> + 0x00010006 0x0000004d
> + 0x00010007 0x00000045
> + 0x00010008 0x0000005e
> + 0x00010009 0x00000066
> + 0x0001000a 0x0000006e
> +
> + 0x00020000 0x00000018
> + 0x00020001 0x00000022
> + 0x00020002 0x0000002d
> + 0x00020003 0x00000038
> + 0x00020004 0x00000043
> + 0x00020005 0x0000004d
> + 0x00020006 0x00000058
> + 0x00020007 0x00000063
> + 0x00020008 0x0000006e
> +
> + 0x00030000 0x00000010
> + 0x00030001 0x0000001c
> + 0x00030002 0x00000029
> + 0x00030003 0x00000036
> + 0x00030004 0x00000042
> + 0x00030005 0x0000004f
> + 0x00030006 0x0000005b
> + 0x00030007 0x00000068>;
> + little-endian;
> + #thermal-sensor-cells = <1>;
> + };
> +
> + thermal-zones {
> + core-cluster {
> + polling-delay-passive = <1000>;
> + polling-delay = <5000>;
> + thermal-sensors = <&tmu 0>;
> +
> + trips {
> + core_cluster_alert: core-cluster-alert {
> + temperature = <85000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + core_cluster_crit: core-cluster-crit {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&core_cluster_alert>;
> + cooling-device =
> + <&cpu0 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>,
> + <&cpu1 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> +
> + ddr-controller {
> + polling-delay-passive = <1000>;
> + polling-delay = <5000>;
> + thermal-sensors = <&tmu 1>;
> +
> + trips {
> + ddr_controller_alert:
> ddr-controller-alert {
> + temperature = <85000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + ddr_controller_crit:
> ddr-controller-crit {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&ddr_controller_alert>;
> + cooling-device =
> + <&cpu0 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>,
> + <&cpu1 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> + };
> +
> pcie@1f0000000 { /* Integrated Endpoint Root Complex */
> compatible = "pci-host-ecam-generic";
> reg = <0x01 0xf0000000 0x0 0x100000>;
