From: Yazen Ghannam <yazen.ghan...@amd.com>
Currently, the DIMM info for AMD Family 17h systems is initialized in
init_csrows(). This function is shared with legacy systems, and it has a
limit of two channel support.
This prevents initialization of the DIMM info for a number of ranks, so
there will be missing ranks in the EDAC sysfs.
Create a new init_csrows_df() for Family17h+ and revert init_csrows()
back to pre-Family17h support.
Loop over all channels in the new function in order to support systems
with more than two channels.
Fixes: bdcee7747f5c ("EDAC/amd64: Support more than two Unified Memory
Controllers")
Signed-off-by: Yazen Ghannam <yazen.ghan...@amd.com>
---
drivers/edac/amd64_edac.c | 63 ++++++++++++++++++++++++++++++---------
1 file changed, 49 insertions(+), 14 deletions(-)
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 125d6e2a828e..d0926b181c7c 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -2837,6 +2837,46 @@ static u32 get_csrow_nr_pages(struct amd64_pvt *pvt, u8
dct, int csrow_nr_orig)
return nr_pages;
}
+static int init_csrows_df(struct mem_ctl_info *mci)
+{
+ struct amd64_pvt *pvt = mci->pvt_info;
+ enum edac_type edac_mode = EDAC_NONE;
+ enum dev_type dev_type = DEV_UNKNOWN;
+ struct dimm_info *dimm;
+ int empty = 1;
+ u8 umc, cs;
+
+ if (mci->edac_ctl_cap & EDAC_FLAG_S16ECD16ED) {
+ edac_mode = EDAC_S16ECD16ED;
+ dev_type = DEV_X16;
+ } else if (mci->edac_ctl_cap & EDAC_FLAG_S4ECD4ED) {
+ edac_mode = EDAC_S4ECD4ED;
+ dev_type = DEV_X4;
+ } else if (mci->edac_ctl_cap & EDAC_FLAG_SECDED) {
+ edac_mode = EDAC_SECDED;
+ }
+
+ for_each_umc(umc) {
+ for_each_chip_select(cs, umc, pvt) {
+ if (!csrow_enabled(cs, umc, pvt))
+ continue;
+
+ empty = 0;
+ dimm = mci->csrows[cs]->channels[umc]->dimm;
+
+ edac_dbg(1, "MC node: %d, csrow: %d\n",
+ pvt->mc_node_id, cs);
+
+ dimm->nr_pages = get_csrow_nr_pages(pvt, umc, cs);
+ dimm->mtype = pvt->dram_type;
+ dimm->edac_mode = edac_mode;
+ dimm->dtype = dev_type;
+ }
+ }
+
+ return empty;
+}
+
/*
* Initialize the array of csrow attribute instances, based on the values
* from pci config hardware registers.
@@ -2851,15 +2891,16 @@ static int init_csrows(struct mem_ctl_info *mci)
int nr_pages = 0;
u32 val;
- if (!pvt->umc) {
- amd64_read_pci_cfg(pvt->F3, NBCFG, &val);
+ if (pvt->umc)
+ return init_csrows_df(mci);
+
+ amd64_read_pci_cfg(pvt->F3, NBCFG, &val);
- pvt->nbcfg = val;
+ pvt->nbcfg = val;
- edac_dbg(0, "node %d, NBCFG=0x%08x[ChipKillEccCap:
%d|DramEccEn: %d]\n",
- pvt->mc_node_id, val,
- !!(val & NBCFG_CHIPKILL), !!(val & NBCFG_ECC_ENABLE));
- }
+ edac_dbg(0, "node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n",
+ pvt->mc_node_id, val,
+ !!(val & NBCFG_CHIPKILL), !!(val & NBCFG_ECC_ENABLE));
/*
* We iterate over DCT0 here but we look at DCT1 in parallel, if needed.
@@ -2896,13 +2937,7 @@ static int init_csrows(struct mem_ctl_info *mci)
edac_dbg(1, "Total csrow%d pages: %u\n", i, nr_pages);
/* Determine DIMM ECC mode: */
- if (pvt->umc) {
- if (mci->edac_ctl_cap & EDAC_FLAG_S4ECD4ED)
- edac_mode = EDAC_S4ECD4ED;
- else if (mci->edac_ctl_cap & EDAC_FLAG_SECDED)
- edac_mode = EDAC_SECDED;
-
- } else if (pvt->nbcfg & NBCFG_ECC_ENABLE) {
+ if (pvt->nbcfg & NBCFG_ECC_ENABLE) {
edac_mode = (pvt->nbcfg & NBCFG_CHIPKILL)
? EDAC_S4ECD4ED
: EDAC_SECDED;
--
2.17.1
