Add support for Apple's custom "SCSI DMA" chip. This patch doesn't make
use of its DMA capability. Just the PDMA capability is sufficient to
improve sequential read throughput by a factor of 5.

Cc: Michael Schmitz <schmitz...@gmail.com>
Cc: Joshua Thompson <fun...@jurai.org>
Cc: Geert Uytterhoeven <ge...@linux-m68k.org>
Tested-by: Stan Johnson <user...@yahoo.com>
Signed-off-by: Finn Thain <fth...@telegraphics.com.au>
---
 arch/m68k/mac/config.c  | 10 +++++++--
 drivers/scsi/mac_scsi.c | 47 ++++++++++++++++++++++++++++++++++-------
 2 files changed, 47 insertions(+), 10 deletions(-)

diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 39835ca5a474..611f73bfc87c 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -911,6 +911,10 @@ static const struct resource mac_scsi_iifx_rsrc[] 
__initconst = {
                .flags = IORESOURCE_MEM,
                .start = 0x50008000,
                .end   = 0x50009FFF,
+       }, {
+               .flags = IORESOURCE_MEM,
+               .start = 0x50008000,
+               .end   = 0x50009FFF,
        },
 };
 
@@ -1012,10 +1016,12 @@ int __init mac_platform_init(void)
        case MAC_SCSI_IIFX:
                /* Addresses from The Guide to Mac Family Hardware.
                 * $5000 8000 - $5000 9FFF: SCSI DMA
+                * $5000 A000 - $5000 BFFF: Alternate SCSI
                 * $5000 C000 - $5000 DFFF: Alternate SCSI (DMA)
                 * $5000 E000 - $5000 FFFF: Alternate SCSI (Hsk)
-                * The SCSI DMA custom IC embeds the 53C80 core. mac_scsi does
-                * not make use of its DMA or hardware handshaking logic.
+                * The A/UX header file sys/uconfig.h says $50F0 8000.
+                * The "SCSI DMA" custom IC embeds the 53C80 core and
+                * supports Programmed IO, DMA and PDMA (hardware handshake).
                 */
                platform_device_register_simple("mac_scsi", 0,
                        mac_scsi_iifx_rsrc, ARRAY_SIZE(mac_scsi_iifx_rsrc));
diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
index e83b47a7e4b5..2e503f06ac99 100644
--- a/drivers/scsi/mac_scsi.c
+++ b/drivers/scsi/mac_scsi.c
@@ -22,6 +22,7 @@
 #include <asm/hwtest.h>
 #include <asm/io.h>
 #include <asm/mac_pdma.h>
+#include <asm/macintosh.h>
 #include <asm/macints.h>
 #include <asm/setup.h>
 
@@ -90,11 +91,22 @@ static int __init mac_scsi_setup(char *str)
 __setup("mac5380=", mac_scsi_setup);
 #endif /* !MODULE */
 
+/* The "SCSI DMA" chip on the IIfx implements this register. */
+#define CTRL_REG                0x8
+#define CTRL_INTERRUPTS_ENABLE  BIT(1)
+#define CTRL_HANDSHAKE_MODE     BIT(3)
+
+static inline void write_ctrl_reg(struct NCR5380_hostdata *hostdata, u32 value)
+{
+       out_be32(hostdata->io + (CTRL_REG << 4), value);
+}
+
 static inline int macscsi_pread(struct NCR5380_hostdata *hostdata,
                                 unsigned char *dst, int len)
 {
        u8 __iomem *s = hostdata->pdma_io + (INPUT_DATA_REG << 4);
        unsigned char *d = dst;
+       int result = 0;
 
        hostdata->pdma_residual = len;
 
@@ -103,6 +115,10 @@ static inline int macscsi_pread(struct NCR5380_hostdata 
*hostdata,
                                      BASR_DRQ | BASR_PHASE_MATCH, HZ / 64)) {
                int bytes;
 
+               if (macintosh_config->ident == MAC_MODEL_IIFX)
+                       write_ctrl_reg(hostdata, CTRL_HANDSHAKE_MODE |
+                                                CTRL_INTERRUPTS_ENABLE);
+
                bytes = mac_pdma_recv(s, d, min(hostdata->pdma_residual, 512));
 
                if (bytes > 0) {
@@ -111,7 +127,7 @@ static inline int macscsi_pread(struct NCR5380_hostdata 
*hostdata,
                }
 
                if (hostdata->pdma_residual == 0)
-                       return 0;
+                       goto out;
 
                if (NCR5380_poll_politely2(hostdata, STATUS_REG, SR_REQ, SR_REQ,
                                           BUS_AND_STATUS_REG, BASR_ACK,
@@ -119,7 +135,7 @@ static inline int macscsi_pread(struct NCR5380_hostdata 
*hostdata,
                        scmd_printk(KERN_DEBUG, hostdata->connected,
                                    "%s: !REQ and !ACK\n", __func__);
                if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH))
-                       return 0;
+                       goto out;
 
                if (bytes == 0)
                        udelay(MAC_PDMA_DELAY);
@@ -130,13 +146,18 @@ static inline int macscsi_pread(struct NCR5380_hostdata 
*hostdata,
                dsprintk(NDEBUG_PSEUDO_DMA, hostdata->host,
                         "%s: bus error (%d/%d)\n", __func__, d - dst, len);
                NCR5380_dprint(NDEBUG_PSEUDO_DMA, hostdata->host);
-               return -1;
+               result = -1;
+               goto out;
        }
 
        scmd_printk(KERN_ERR, hostdata->connected,
                    "%s: phase mismatch or !DRQ\n", __func__);
        NCR5380_dprint(NDEBUG_PSEUDO_DMA, hostdata->host);
-       return -1;
+       result = -1;
+out:
+       if (macintosh_config->ident == MAC_MODEL_IIFX)
+               write_ctrl_reg(hostdata, CTRL_INTERRUPTS_ENABLE);
+       return result;
 }
 
 static inline int macscsi_pwrite(struct NCR5380_hostdata *hostdata,
@@ -144,6 +165,7 @@ static inline int macscsi_pwrite(struct NCR5380_hostdata 
*hostdata,
 {
        unsigned char *s = src;
        u8 __iomem *d = hostdata->pdma_io + (OUTPUT_DATA_REG << 4);
+       int result = 0;
 
        hostdata->pdma_residual = len;
 
@@ -152,6 +174,10 @@ static inline int macscsi_pwrite(struct NCR5380_hostdata 
*hostdata,
                                      BASR_DRQ | BASR_PHASE_MATCH, HZ / 64)) {
                int bytes;
 
+               if (macintosh_config->ident == MAC_MODEL_IIFX)
+                       write_ctrl_reg(hostdata, CTRL_HANDSHAKE_MODE |
+                                                CTRL_INTERRUPTS_ENABLE);
+
                bytes = mac_pdma_send(s, d, min(hostdata->pdma_residual, 512));
 
                if (bytes > 0) {
@@ -165,7 +191,7 @@ static inline int macscsi_pwrite(struct NCR5380_hostdata 
*hostdata,
                                                  TCR_LAST_BYTE_SENT, HZ / 64) 
< 0)
                                scmd_printk(KERN_ERR, hostdata->connected,
                                            "%s: Last Byte Sent timeout\n", 
__func__);
-                       return 0;
+                       goto out;
                }
 
                if (NCR5380_poll_politely2(hostdata, STATUS_REG, SR_REQ, SR_REQ,
@@ -174,7 +200,7 @@ static inline int macscsi_pwrite(struct NCR5380_hostdata 
*hostdata,
                        scmd_printk(KERN_DEBUG, hostdata->connected,
                                    "%s: !REQ and !ACK\n", __func__);
                if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH))
-                       return 0;
+                       goto out;
 
                if (bytes == 0)
                        udelay(MAC_PDMA_DELAY);
@@ -185,13 +211,18 @@ static inline int macscsi_pwrite(struct NCR5380_hostdata 
*hostdata,
                dsprintk(NDEBUG_PSEUDO_DMA, hostdata->host,
                         "%s: bus error (%d/%d)\n", __func__, s - src, len);
                NCR5380_dprint(NDEBUG_PSEUDO_DMA, hostdata->host);
-               return -1;
+               result = -1;
+               goto out;
        }
 
        scmd_printk(KERN_ERR, hostdata->connected,
                    "%s: phase mismatch or !DRQ\n", __func__);
        NCR5380_dprint(NDEBUG_PSEUDO_DMA, hostdata->host);
-       return -1;
+       result = -1;
+out:
+       if (macintosh_config->ident == MAC_MODEL_IIFX)
+               write_ctrl_reg(hostdata, CTRL_INTERRUPTS_ENABLE);
+       return result;
 }
 
 static int macscsi_dma_xfer_len(struct NCR5380_hostdata *hostdata,
-- 
2.21.0

Reply via email to