Hi Karthikeyan,

Thanks a lot for your comments!

> -----Original Message-----
> From: Karthikeyan Mitran [mailto:m.karthike...@mobiveil.co.in]
> Sent: 2019年6月3日 13:13
> To: Z.q. Hou <zhiqiang....@nxp.com>
> Cc: linux-...@vger.kernel.org; linux-arm-ker...@lists.infradead.org;
> devicet...@vger.kernel.org; linux-kernel@vger.kernel.org;
> bhelg...@google.com; robh...@kernel.org; a...@arndb.de;
> mark.rutl...@arm.com; l.subrahma...@mobiveil.co.in;
> shawn...@kernel.org; Leo Li <leoyang...@nxp.com>;
> lorenzo.pieral...@arm.com; catalin.mari...@arm.com;
> will.dea...@arm.com; Mingkai Hu <mingkai...@nxp.com>; M.h. Lian
> <minghuan.l...@nxp.com>; Xiaowei Bao <xiaowei....@nxp.com>
> Subject: Re: [PATCHv6 5/6] arm64: dts: lx2160a: Add PCIe controller DT nodes
> 
> Hi Hou Zhiqiang
>    Two instances [@3600000 and @3800000] of the six has a different
> window count, the RC can not have more than 8 windows.
> apio-wins = <256>;  //Can we change it to 8
> ppio-wins = <24>;    //Can we change it to 8
> 

I checked with hardware team, the PCIe controllers @3600000 and @3800000 support
up to x8 and SRIOV, these 2 controllers have different number of inbound and 
outbound
windows from the other 4 PCIe controllers which are support up to x4 and not 
support
SRIOV.

> On Tue, May 28, 2019 at 12:20 PM Z.q. Hou <zhiqiang....@nxp.com> wrote:
> >
> > From: Hou Zhiqiang <zhiqiang....@nxp.com>
> >
> > The LX2160A integrated 6 PCIe Gen4 controllers.
> >
> > Signed-off-by: Hou Zhiqiang <zhiqiang....@nxp.com>
> > Reviewed-by: Minghuan Lian <minghuan.l...@nxp.com>
> > ---
> > V6:
> >  - No change.
> >
> >  .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 163
> > ++++++++++++++++++
> >  1 file changed, 163 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > index 125a8cc2c5b3..7a2b91ff1fbc 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> > @@ -964,5 +964,168 @@
> >                                 };
> >                         };
> >                 };
> > +
> > +               pcie@3400000 {
> > +                       compatible = "fsl,lx2160a-pcie";
> > +                       reg = <0x00 0x03400000 0x0 0x00100000
> /* controller registers */
> > +                              0x80 0x00000000 0x0 0x00001000>;
> /* configuration space */
> > +                       reg-names = "csr_axi_slave",
> "config_axi_slave";
> > +                       interrupts = <GIC_SPI 108
> IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
> > +                                    <GIC_SPI 108
> IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
> > +                                    <GIC_SPI 108
> IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
> > +                       interrupt-names = "aer", "pme", "intr";
> > +                       #address-cells = <3>;
> > +                       #size-cells = <2>;
> > +                       device_type = "pci";
> > +                       dma-coherent;
> > +                       apio-wins = <8>;
> > +                       ppio-wins = <8>;
> > +                       bus-range = <0x0 0xff>;
> > +                       ranges = <0x82000000 0x0 0x40000000 0x80
> 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
> > +                       msi-parent = <&its>;
> > +                       #interrupt-cells = <1>;
> > +                       interrupt-map-mask = <0 0 0 7>;
> > +                       interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI
> 109 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 2 &gic 0 0
> GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 3 &gic 0 0
> GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 4 &gic 0 0
> GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
> > +                       status = "disabled";
> > +               };
> > +
> > +               pcie@3500000 {
> > +                       compatible = "fsl,lx2160a-pcie";
> > +                       reg = <0x00 0x03500000 0x0 0x00100000
> /* controller registers */
> > +                              0x88 0x00000000 0x0 0x00001000>;
> /* configuration space */
> > +                       reg-names = "csr_axi_slave",
> "config_axi_slave";
> > +                       interrupts = <GIC_SPI 113
> IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
> > +                                    <GIC_SPI 113
> IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
> > +                                    <GIC_SPI 113
> IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
> > +                       interrupt-names = "aer", "pme", "intr";
> > +                       #address-cells = <3>;
> > +                       #size-cells = <2>;
> > +                       device_type = "pci";
> > +                       dma-coherent;
> > +                       apio-wins = <8>;
> > +                       ppio-wins = <8>;
> > +                       bus-range = <0x0 0xff>;
> > +                       ranges = <0x82000000 0x0 0x40000000 0x88
> 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
> > +                       msi-parent = <&its>;
> > +                       #interrupt-cells = <1>;
> > +                       interrupt-map-mask = <0 0 0 7>;
> > +                       interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI
> 114 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 2 &gic 0 0
> GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 3 &gic 0 0
> GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 4 &gic 0 0
> GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> > +                       status = "disabled";
> > +               };
> > +
> > +               pcie@3600000 {
> > +                       compatible = "fsl,lx2160a-pcie";
> > +                       reg = <0x00 0x03600000 0x0 0x00100000
> /* controller registers */
> > +                              0x90 0x00000000 0x0 0x00001000>;
> /* configuration space */
> > +                       reg-names = "csr_axi_slave",
> "config_axi_slave";
> > +                       interrupts = <GIC_SPI 118
> IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
> > +                                    <GIC_SPI 118
> IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
> > +                                    <GIC_SPI 118
> IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
> > +                       interrupt-names = "aer", "pme", "intr";
> > +                       #address-cells = <3>;
> > +                       #size-cells = <2>;
> > +                       device_type = "pci";
> > +                       dma-coherent;
> > +                       apio-wins = <256>;
> > +                       ppio-wins = <24>;
> > +                       bus-range = <0x0 0xff>;
> > +                       ranges = <0x82000000 0x0 0x40000000 0x90
> 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
> > +                       msi-parent = <&its>;
> > +                       #interrupt-cells = <1>;
> > +                       interrupt-map-mask = <0 0 0 7>;
> > +                       interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI
> 119 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 2 &gic 0 0
> GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 3 &gic 0 0
> GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 4 &gic 0 0
> GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
> > +                       status = "disabled";
> > +               };
> > +
> > +               pcie@3700000 {
> > +                       compatible = "fsl,lx2160a-pcie";
> > +                       reg = <0x00 0x03700000 0x0 0x00100000
> /* controller registers */
> > +                              0x98 0x00000000 0x0 0x00001000>;
> /* configuration space */
> > +                       reg-names = "csr_axi_slave",
> "config_axi_slave";
> > +                       interrupts = <GIC_SPI 123
> IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
> > +                                    <GIC_SPI 123
> IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
> > +                                    <GIC_SPI 123
> IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
> > +                       interrupt-names = "aer", "pme", "intr";
> > +                       #address-cells = <3>;
> > +                       #size-cells = <2>;
> > +                       device_type = "pci";
> > +                       dma-coherent;
> > +                       apio-wins = <8>;
> > +                       ppio-wins = <8>;
> > +                       bus-range = <0x0 0xff>;
> > +                       ranges = <0x82000000 0x0 0x40000000 0x98
> 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
> > +                       msi-parent = <&its>;
> > +                       #interrupt-cells = <1>;
> > +                       interrupt-map-mask = <0 0 0 7>;
> > +                       interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI
> 124 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 2 &gic 0 0
> GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 3 &gic 0 0
> GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 4 &gic 0 0
> GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
> > +                       status = "disabled";
> > +               };
> > +
> > +               pcie@3800000 {
> > +                       compatible = "fsl,lx2160a-pcie";
> > +                       reg = <0x00 0x03800000 0x0 0x00100000
> /* controller registers */
> > +                              0xa0 0x00000000 0x0 0x00001000>;
> /* configuration space */
> > +                       reg-names = "csr_axi_slave",
> "config_axi_slave";
> > +                       interrupts = <GIC_SPI 128
> IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
> > +                                    <GIC_SPI 128
> IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
> > +                                    <GIC_SPI 128
> IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
> > +                       interrupt-names = "aer", "pme", "intr";
> > +                       #address-cells = <3>;
> > +                       #size-cells = <2>;
> > +                       device_type = "pci";
> > +                       dma-coherent;
> > +                       apio-wins = <256>;
> > +                       ppio-wins = <24>;
> > +                       bus-range = <0x0 0xff>;
> > +                       ranges = <0x82000000 0x0 0x40000000 0xa0
> 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
> > +                       msi-parent = <&its>;
> > +                       #interrupt-cells = <1>;
> > +                       interrupt-map-mask = <0 0 0 7>;
> > +                       interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI
> 129 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 2 &gic 0 0
> GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 3 &gic 0 0
> GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 4 &gic 0 0
> GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
> > +                       status = "disabled";
> > +               };
> > +
> > +               pcie@3900000 {
> > +                       compatible = "fsl,lx2160a-pcie";
> > +                       reg = <0x00 0x03900000 0x0 0x00100000
> /* controller registers */
> > +                              0xa8 0x00000000 0x0 0x00001000>;
> /* configuration space */
> > +                       reg-names = "csr_axi_slave",
> "config_axi_slave";
> > +                       interrupts = <GIC_SPI 103
> IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
> > +                                    <GIC_SPI 103
> IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
> > +                                    <GIC_SPI 103
> IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
> > +                       interrupt-names = "aer", "pme", "intr";
> > +                       #address-cells = <3>;
> > +                       #size-cells = <2>;
> > +                       device_type = "pci";
> > +                       dma-coherent;
> > +                       apio-wins = <8>;
> > +                       ppio-wins = <8>;
> > +                       bus-range = <0x0 0xff>;
> > +                       ranges = <0x82000000 0x0 0x40000000 0xa8
> 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
> > +                       msi-parent = <&its>;
> > +                       #interrupt-cells = <1>;
> > +                       interrupt-map-mask = <0 0 0 7>;
> > +                       interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI
> 104 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 2 &gic 0 0
> GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 3 &gic 0 0
> GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> > +                                       <0000 0 0 4 &gic 0 0
> GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
> > +                       status = "disabled";
> > +               };
> > +
> >         };
> >  };
> > --
> > 2.17.1
> >
> 
> 
> --
> Thanks,
> Regards,
> Karthikeyan Mitran
> 
> --
> Mobiveil INC., CONFIDENTIALITY NOTICE: This e-mail message, including any
> attachments, is for the sole use of the intended recipient(s) and may contain
> proprietary confidential or privileged information or otherwise be protected
> by law. Any unauthorized review, use, disclosure or distribution is 
> prohibited. If
> you are not the intended recipient, please notify the sender and destroy all
> copies and the original message.

Thanks,
Zhiqiang

Reply via email to