On 05/06/19 11:38 AM, Keerthy wrote:
> Add gpio0 node under wakeup domain. This has 56 gpios
> and all are capable of generating banked interrupts.
>
> Signed-off-by: Keerthy <j-keer...@ti.com>
> ---
> arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
> b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
> index f1ca171abdf8..8c6c99e7c6ed 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
> @@ -74,4 +74,19 @@
> ti,sci-dst-id = <56>;
> ti,sci-rm-range-girq = <0x4>;
> };
> +
> + wkup_gpio0: wkup_gpio0@42110000 {
> + compatible = "ti,k2g-gpio", "ti,keystone-gpio";
This is not k2g. Can you either create a am6 specific compatible or just use
ti,keystone-gpio.
Thanks and regards,
Lokesh
> + reg = <0x42110000 0x100>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-parent = <&intr_wkup_gpio>;
> + interrupts = <59 128>, <59 129>, <59 130>, <59 131>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + ti,ngpio = <56>;
> + ti,davinci-gpio-unbanked = <0>;
> + clocks = <&k3_clks 59 0>;
> + clock-names = "gpio";
> + };
> };
>
