On 03/06/2019 11:47, Neil Armstrong wrote:
> The 32k low power clock is necessary for the bluetooth part of the
> combo module to initialize correctly, simply add the same clock we
> use for the sdio pwrseq.
>
> Fixes: c5c9c7cff269 ("arm64: dts: meson-g12a-x96-max: Enable BT Module")
> Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> index 2c10ebfd9e7c..aa9da5de5c2d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> @@ -206,6 +206,8 @@
> bluetooth {
> compatible = "brcm,bcm43438-bt";
> shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
> + clocks = <&wifi32k>;
> + clock-names = "lpo";
> };
> };
>
>
The Fixes is wrong... wifi32k was not present at this time.
Neil
