This patch provides basic support for booting with ACPI instead
of the currently supported Device Tree.  When doing so there are a
couple of differences which we need to taken into consideration.

Firstly, the SDM850 ACPI tables omit information pertaining to the
4 reserved GPIOs on the platform.  If Linux attempts to touch/
initialise any of these lines, the firmware will restart the
platform.

Secondly, when booting with ACPI, it is expected that the firmware
will set-up things like; Regulators, Clocks, Pin Functions, etc in
their ideal configuration.  Thus, the possible Pin Functions
available to this platform are not advertised when providing the
higher GPIOD/Pinctrl APIs with pin information.

Signed-off-by: Lee Jones <lee.jo...@linaro.org>
---
 drivers/pinctrl/qcom/Kconfig          |  2 +-
 drivers/pinctrl/qcom/pinctrl-sdm845.c | 35 ++++++++++++++++++++++++++-
 2 files changed, 35 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 2e66ab72c10b..aafbe932424f 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -168,7 +168,7 @@ config PINCTRL_SDM660
 
 config PINCTRL_SDM845
        tristate "Qualcomm Technologies Inc SDM845 pin controller driver"
-       depends on GPIOLIB && OF
+       depends on GPIOLIB && (OF || ACPI)
        select PINCTRL_MSM
        help
          This is the pinctrl, pinmux, pinconf and gpiolib driver for the
diff --git a/drivers/pinctrl/qcom/pinctrl-sdm845.c 
b/drivers/pinctrl/qcom/pinctrl-sdm845.c
index c97f20fca5fd..7188bee3cf3e 100644
--- a/drivers/pinctrl/qcom/pinctrl-sdm845.c
+++ b/drivers/pinctrl/qcom/pinctrl-sdm845.c
@@ -3,6 +3,7 @@
  * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
  */
 
+#include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
@@ -1277,6 +1278,10 @@ static const struct msm_pingroup sdm845_groups[] = {
        UFS_RESET(ufs_reset, 0x99f000),
 };
 
+static const int sdm845_acpi_reserved_gpios[] = {
+       0, 1, 2, 3, 81, 82, 83, 84, -1
+};
+
 static const struct msm_pinctrl_soc_data sdm845_pinctrl = {
        .pins = sdm845_pins,
        .npins = ARRAY_SIZE(sdm845_pins),
@@ -1284,14 +1289,41 @@ static const struct msm_pinctrl_soc_data sdm845_pinctrl 
= {
        .nfunctions = ARRAY_SIZE(sdm845_functions),
        .groups = sdm845_groups,
        .ngroups = ARRAY_SIZE(sdm845_groups),
+       .reserved_gpios = sdm845_acpi_reserved_gpios,
+       .ngpios = 150,
+};
+
+static const struct msm_pinctrl_soc_data sdm845_acpi_pinctrl = {
+       .pins = sdm845_pins,
+       .npins = ARRAY_SIZE(sdm845_pins),
+       .groups = sdm845_groups,
+       .ngroups = ARRAY_SIZE(sdm845_groups),
+       .reserved_gpios = sdm845_acpi_reserved_gpios,
        .ngpios = 150,
 };
 
 static int sdm845_pinctrl_probe(struct platform_device *pdev)
 {
-       return msm_pinctrl_probe(pdev, &sdm845_pinctrl);
+       int ret;
+
+       if (pdev->dev.of_node) {
+               ret = msm_pinctrl_probe(pdev, &sdm845_pinctrl);
+       } else if (ACPI_HANDLE(&pdev->dev)) {
+               ret = msm_pinctrl_probe(pdev, &sdm845_acpi_pinctrl);
+       } else {
+               dev_err(&pdev->dev, "DT and ACPI disabled\n");
+               return -EINVAL;
+       }
+
+       return ret;
 }
 
+static const struct acpi_device_id sdm845_pinctrl_acpi_match[] = {
+       { "QCOM0217"},
+       { },
+};
+MODULE_DEVICE_TABLE(acpi, sdm845_pinctrl_acpi_match);
+
 static const struct of_device_id sdm845_pinctrl_of_match[] = {
        { .compatible = "qcom,sdm845-pinctrl", },
        { },
@@ -1302,6 +1334,7 @@ static struct platform_driver sdm845_pinctrl_driver = {
                .name = "sdm845-pinctrl",
                .pm = &msm_pinctrl_dev_pm_ops,
                .of_match_table = sdm845_pinctrl_of_match,
+               .acpi_match_table = ACPI_PTR(sdm845_pinctrl_acpi_match),
        },
        .probe = sdm845_pinctrl_probe,
        .remove = msm_pinctrl_remove,
-- 
2.17.1

Reply via email to